【转帖】asme美国机械工程师标准目录2

huangyhg

Ansi/asme-b5.10 Machine Tapers
Ansi/asme-b5.11 Spindle Noses And Adjustable Adapters For Multiple Spindle Drilling Heads One Of A Series Of Standards For Small Tools And Machine Tool Elements
Ansi/asme-b5.18 Spindle Noses And Tool Shanks For Milling Machines
Ansi/asme-b5.1m T-slots, Their Bolts, Nuts, And Tongues - Revision Of Ansi B5.1-1975; Should Be Used Instead Of Ansi B5.1. Which Was Cancelled In 1985
Ansi/asme-b5.25 Punch And Die Sets
Ansi/asme-b5.25m Punch And Die Sets (metric)
Ansi/asme-b5.35 Machine Mounting Specifications For Abrasive Discs And Plate Mounted Wheels - Errata - October 1985
Ansi/asme-b5.40 Spindle Noses And Tool Shanks For Horizontal Boring Machines
Ansi/asme-b5.47 Milling Machine Arbor Assemblies
Ansi/asme-b5.48 Ball Screws - Errata - March 1979
Ansi/asme-b5.49 Glossary Of Power Press Terms
Ansi/asme-b5.50 V Flange Tool Shanks For Machining Centers With Automatic Tool Changers - Errata - February 1995
Ansi/asme-b5.51m Preferred Si Units For Machine Tools
Ansi/asme-b5.52 Power Presses: General Purpose, Single-point Gap Type
Ansi/asme-b5.55m Specification And Performance Standard, Power Press Brakes
Ansi/asme-b5.56m Specification And Performance Standard, Power Shears
Ansi/asme-b5.57 Methods For Performance Evaluation Of Computer Numerically Controlled Lathes And Turning Centers
Ansi/asme-b5.60 Workholding Chucks: Jaw Type Chucks - Incorporating Asme B 5.60.1 And Asme B5.60.4
Ansi/asme-b5.61 Power Presses: General Purpose, Single Action, Straight Side Type
Ansi/asme-b5.8 Chucks And Chuck Jaws
Ansi/asme-b5.9 Spindle Noses For Tool Room Lathes, Engine Lathes, Turret Lathes, And Automatic Lathes
Ansi/asme-b56.1 Safety Standard For Low Lift And High Lift Trucks
Ansi/asme-b56.10 Safety Standard For Manually Propelled High Lift Industrial Trucks - Special Notice - October 1993
Ansi/asme-b56.11.1 Double Race Or Bi-level Swivel And Rigid Industrial Casters - Special Notice - October 1993
Ansi/asme-b56.11.4 Hook-type Forks And Fork Carriers For Powered Industrial Forklift Trucks - Special Notice - February 1993; Addenda A - 7/22/1994
Ansi/asme-b56.11.5 Measurements Of Sound Emitted By Low Lift, High Lift, And Rough Terrain Powered Industrial Trucks - Special Notice - October 1993; Addenda A - 11/15/1994
Ansi/asme-b56.11.6 Evaluation Of Visibility From Powered Industrial Trucks
Ansi/asme-b56.11.7 Liquid Propane Gas (lpg) Fuel Cylinders (horizontal Or Vertical) Mounting - Liquid Withdrawal - For Powered Industrial Trucks
Ansi/asme-b56.5 Safety Standard For Guided Industrial Vehicles And Automated Functions Of Manned Industrial Vehicles
Ansi/asme-b56.5 Interpretations To B56.5-1993 Safety Standard For Guided Industrial Vehicles And Automated Functions Of Manned Industrial Vehicles
Ansi/asme-b56.6 Interpretations To B56.6-1993 Safety Standard For Rough Terrain Forklift Trucks
Ansi/asme-b56.8 Safety Standard For Personnel And Burden Carriers - Addenda A - 10/15/1994
Ansi/asme-b56.8 Interpretations To B56.8-1993 Safety Standard For Personnel And Burden Carriers
Ansi/asme-b56.9 Safety Standard For Operator Controlled Industrial Tow Tractors - Addenda A - 1992
Ansi/asme-b73.2 Specification For Vertical In-line Centrifugal Pumps For Chemical Process
Ansi/asme-b73.5m Specification For Thermoplastic And Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps For Chemical Process
Ansi/asme-b89.1.10m Dial Indicators (for Linear Measurements)
Ansi/asme-b89.1.13 Micrometers
Ansi/asme-b89.1.17 Measurement Of Thread Measuring Wires
Ansi/asme-b89.1.2m Calibration Of Gage Blocks By Contact Comparison Methods (through 20 In. And 500 Mm)
Ansi/asme-b89.1.5 Measurement Of Plain External Diameters For Use As Master Discs Or Cylindrical Plug Gages
Ansi/asme-b89.1.6 Measurement Of Plain Internal Diameters For Use As Master Rings And Ring Gages
Ansi/asme-b89.3.4m Axes Of Rotation Methods For Specifying And Testing
Ansi/asme-b89.4.1 Methods For Performance Evaluation Of Coordinate Measuring Machines - Revision Of Asme B89.1.12m-1990; Addenda A - 6/8/1998; Addenda B - 2/8/2002
Ansi/asme-b89.4.10 Methods For Performance Evaluation Of Coordinate Measuring Systems Software - Erratum September 2003
Ansi/asme-b89.4.22 Methods For Performance Evaluation Of Articulated Arm Coordinate Measuring Machines - Date Of Issuance: 8/12/2005
Ansi/asme-b89.7.2 Dimensional Measurement Planning
Ansi/asme-b89.7.3.1 Guidelines For Decision Rules: Considering Measurement Uncertainty In Determining Conformance To Specifications
Ansi/asme-b89.7.3.3 Guidelines For Assessing The Reliability Of Dimensional Measurement Uncertainty Statements
Ansi/asme-b94.11m Twist Drills
Ansi/asme-b94.19 Milling Cutters And End Mills
Ansi/asme-b94.2 Reamers
Ansi/asme-b94.21 Gear Shaper Cutters
Ansi/asme-b94.33 Jig Bushings
Ansi/asme-b94.37m Roller Turner Type Cutting Tools, Single Point - Revision Of B94.37-1972
Ansi/asme-b94.49 Spade Drill Blades And Spade Drill Holders
Ansi/asme-b94.50 Basic Nomenclature And Definitions For Single-point Cutting Tools
Ansi/asme-b94.51m Specifications For Band Saw Blades (metal Cutting)
Ansi/asme-b94.52m Specifications For Hacksaw Blades
Ansi/asme-b94.53 Solid Steel Rectangular Metal Cutting Squaring Shear Knives Dimensional Tolerances
Ansi/asme-b94.54 Specifications For Hole Saws, Hole Saw Arbors, And Hole Saw Accessories
Ansi/asme-b94.55m Tool Life Testing With Single-point Turning Tools - Revision Of Ansi B94.34-1946 And B94.36-1956
Ansi/asme-b94.6 Knurling
Ansi/asme-b94.7 Hobs
Ansi/asme-b94.9 Taps: Ground And Cut Threads (inch And Metric Sizes) - Errata - October 2001
Ansi/asme-b96.1 Welded Aluminum-alloy Storage Tanks
Ansi/asme-bth-1 Design Of Below-the-hook Lifting Devices
Ansi/asme-csd-1 Controls And Safety Devices For Automatically Fired Boilers
Ansi/asme-csd-1 Interpretations To Csd-1 Controls And Safety Devices For Automatically Fired Boilers - Includes Interpretations Dated February 1989 Thru June 2001
Ansi/asme-hps High Pressure Systems
Ansi/asme-hst-1 Performance Standard For Electric Chain Hoists
Ansi/asme-hst-2 Performance Standard For Hand Chain Manually Operated Chain Hoists
Ansi/asme-hst-3 Performance Standard For Manually Lever Operated Chain Hoists
Ansi/asme-hst-4 Performance Standard For Overhead Electric Wire Rope Hoists
Ansi/asme-hst-5 Performance Standard For Air Chain Hoists
Ansi/asme-hst-6 Performance Standard For Air Wire Rope Hoists
Ansi/asme-mfc-10m Method For Establishing Installation Effects On Flowmeters
Ansi/asme-mfc-11m Measurement Of Fluid Flow By Means Of Coriolis Mass Flowmeters
Ansi/asme-mfc-14m Measurement Of Fluid Flow Using Small Bore Precision Orifice Meters
Ansi/asme-mfc-16m Measurement Of Fluid Flow In Closed Conduits By Means Of Electromagnetic Flowmeters
Ansi/asme-mfc-18m Measurement Of Fluid Flow Using Variable Area Meters
Ansi/asme-mfc-1m Glossary Of Terms Used In The Measurement Of Fluid Flow In Pipes
Ansi/asme-mfc-2m Measurement Uncertainty For Fluid Flow In Closed Conduits
Ansi/asme-mfc-3m Measurement Of Fluid Flow In Pipes Using Orifice, Nozzle, And Venturi - Date Of Issuance: 8/15/2005
Ansi/asme-mfc-4m Measurement Of Gas Flow By Turbine Meters
Ansi/asme-mfc-5m Measurement Of Liquid Flow In Closed Conduits Using Transit-time Ultrasonic Flowmeters
Ansi/asme-mfc-7m Measurement Of Gas Flow By Means Of Critical Flow Venturi Nozzles
Ansi/asme-mfc-8m Fluid Flow In Closed Conduits : Connections For Pressure Signal Transmissions Between Primary And Secondary Devices
Ansi/asme-mfc-9m Measurement Of Liquid Flow In Closed Conduits By Weighing Methods - Errata - December 1989
Ansi/asme-mh1 Pallets, Slip Sheets, And Other Bases For Unit Loads
Ansi/asme-n278.1 Self-operated And Power-operated Safety-related Valves Functional Specification Standard, Reactor Plants And Their Maintenance
Ansi/asme-n509 Nuclear Power Plant Air-cleaning Units And Components
Ansi/asme-n509 Interpretations To N509-1989 Nuclear Power Plant Air-cleaning Units And Components
Ansi/asme-n510 Testing Of Nuclear Air Treatment Systems - Errata: January 1991
Ansi/asme-nqa-1 Quality Assurance Requirements For Nuclear Facility Applications
Ansi/asme-om-code Code For Operation And Maintenance Of Nuclear Power Plants - Addenda A: 2005
Ansi/asme-om-code Interpretations To Om Code-1998 Code For Operation And Maintenance Of Nuclear Power Plants
Ansi/asme-om-code-cases Code Cases To Om Code Code For Operation And Maintenance Of Nuclear Power Plants
Ansi/asme-pald Safety Standard For Portable Automotive Lifting Devices
Ansi/asme-pald Interpretations To Pald-1997 Safety Standard For Portable Automotive Lifting Devices
Ansi/asme-pcc-1 Guidelines For Pressure Boundary Bolted Flange Joint Assembly
Ansi/asme-ptc-1 General Instructions Performance Test Codes
Ansi/asme-ptc-10 Performance Test Code On Compressors And Exhausters
Ansi/asme-ptc-11 Fans
Ansi/asme-ptc-12.1 Closed Feedwater Heaters
Ansi/asme-ptc-12.2 Performance Test Code On Steam Surface Condensers
Ansi/asme-ptc-12.5 Single Phase Heat Exchangers
Ansi/asme-ptc-17 Reciprocating Internal-combustion Engines
Ansi/asme-ptc-18 Hydraulic Turbines And Pump-turbines - Consolidation Of Asme Ptc 18-1992 And Asme Ptc 18.1-1978
Ansi/asme-ptc-19.1 Test Uncertainty Instruments And Apparatus
Ansi/asme-ptc-19.10 Part 10: Flue And Exhaust Gas Analyses Instruments And Apparatus
Ansi/asme-ptc-19.11 Steam And Water Sampling, Conditioning, And Analysis In The Power Cycle
Ansi/asme-ptc-19.2 Part 2: Pressure Measurement Instruments And Apparatus
Ansi/asme-ptc-19.22 Part 22: Digital Systems Techniques Instruments And Apparatus
Ansi/asme-ptc-19.23 Part 23: Guidance Manual For Model Testing Instruments And Apparatus
Ansi/asme-ptc-19.5 Flow Measurement
Ansi/asme-ptc-19.7 Part 7: Measurement Of Shaft Power Instruments And Apparatus
Ansi/asme-ptc-2 Definitions And Values Performance Test Codes
Ansi/asme-ptc-21 Particulate Matter Collection Equipment
Ansi/asme-ptc-22 Performance Test Code On Gas Turbines - Errata 08/1999
Ansi/asme-ptc-23 Atmospheric Water Cooling Equipment
Ansi/asme-ptc-24 Ejectors
Ansi/asme-ptc-25 Pressure Relief Devices
Ansi/asme-ptc-25-special-addenda Special Addenda To Ptc 25-1994 Pressure Relief Devices
Ansi/asme-ptc-30 Air Cooled Heat Exchangers
Ansi/asme-ptc-31 Ion Exchange Equipment
Ansi/asme-ptc-38 Determining The Concentration Of Particulate Matter In A Gas Stream
Ansi/asme-ptc-4 Fire Steam Generators - Revision Of Asme Ptc 4.1-1964(r1991)
Ansi/asme-ptc-4.2 Coal Pulverizers
Ansi/asme-ptc-4.3 Air Heaters
Ansi/asme-ptc-40 Flue Gas Desulfurization Units
Ansi/asme-ptc-42 Wind Turbines
Ansi/asme-ptc-46 Performance Test Code On Overall Plant Performance
Ansi/asme-ptc-50 Fuel Cell Power Systems Performance
Ansi/asme-ptc-6a Appendix A To Ptc 6, The Test Code For Steam Turbines
Ansi/asme-ptc-6-report Guidance For Evaluation Of Measurement Uncertainty In Performance Tests Of Steam Turbines
Ansi/asme-ptc-6s-report Procedures For Routine Performance Tests Of Steam Turbines
Ansi/asme-pvho-1 Safety Standard For Pressure Vessels For Human Occupancy
Ansi/asme-pvho-2 Safety Standard For Pressure Vessels For Human Occupancy In-service Guidelines For Pvho Acrylic Windows
Ansi/asme-qei-1 Standard For The Qualification Of Elevator Inspectors
Ansi/asme-qfo-1 Standard For The Qualification And Certification Of Operators Of High Capacity Fossil Fuel Fired Plants
Ansi/asme-qho-1 Standard For The Qualification And Certification Of Hazardous Waste Incinerator Operators
Ansi/asme-qme-1 Qualification Of Active Mechanical Equipment Used In Nuclear Power Plants
Ansi/asme-qmo-1 Qualification And Certification Of Medical Waste Incinerator Operators
Ansi/asme-qro-1 Qualification And Certification Of Resource Recovery Facility Operators - Addenda A - 9/30/1996; Addenda B - 5/15/1998
Ansi/asme-ra-s-2002 Standard For Probabilistic Risk Assessment For Nuclear Power Plant Applications - Addenda A: 12/5/2003; Addenda B: 12/30/2005
Ansi/asme-rtp-1 Interpretations To Rtp-1-1995 Reinforced Thermoset Plastic Corrosion Resistant Equipment
Ansi/asme-sts-1 Steel Stacks - Addenda A: 2003
Ansi/asme-tdp-1 Recommended Practices For The Prevention Of Water Damage To Steam Turbines Used For Electric Power Generation
Ansi/asme-y14.1 Decimal Inch Drawing Sheet Size And Format
Ansi/asme-y14.100 Engineering Drawing Practices
Ansi/asme-y14.1m Metric Drawing Sheet Size And Format
Ansi/asme-y14.24 Types And Applications Of Engineering Drawings - Revision Of Asme Y14.24m-1989
Ansi/asme-y14.3 Multiview And Sectional View Drawings
Ansi/asme-y14.32.1m Chassis Frames - Passenger Car And Light Truck - Ground Vechicle Practices
Ansi/asme-y14.34m Associated Lists
Ansi/asme-y14.36m Surface Texture Symbols
Ansi/asme-y14.41 Digital Product Definition Data Practices
Ansi/asme-y14.42 Digital Approval Systems
Ansi/asme-y14.4m Pictorial Drawing
Ansi/asme-y14.5.1m Mathematical Definition Of Dimensioning And Tolerancing Principles
Ansi/asme-y14.5m Dimensioning And Tolerancing
Ansi/asme-y14.6 Screw Thread Representation
Ansi/asme-y14.7.2 Gear And Spline Drawing Standards Part 2 - Bevel And Hypoid Gears
Ansi/asme-y14.8m Castings And Forgings
Ansi/asme-y32.18 Symbols For Mechanical And Acoustical Elements As Used In Schematic Diagrams
Ansi/asme-y32.4 Graphic Symbols For Plumbing Fixtures For Diagrams Used In Architecture And Building Construction - Revision Of Ansi Y32.4-54
Ansi/asme-y32.7 Graphic Symbols For Railroad Maps And Profiles
Asme-a112.18.1 Plumbing Fixture Fittings
Asme-a112.18.2 Plumbing Fixture Waste Fittings
Asme-a112.19.14 Six-liter Water Closets Equipped With Dual Flushing Device - Supplement 1: 2003
Asme-a112.21.2m Roof Drains - Revision Of Ansi A112.21.2-1971
Asme-a13.1 Scheme For The Identification Of Piping Systems
Asme-a15100 Guide For Asme Stamp Holders
Asme-a17.1 Safety Code For Elevators And Escalators - Addenda A: 2005; Supplement: 08/12/2005
Asme-a17.1 Interpretations To A17.1-2003 Safety Code For Elevators And Escalators - Includes Interpretations No. 25 Through 27
Asme-a17.1-hdbk Safety Code For Elevators And Escalators
Asme-a17.3 Safety Code For Existing Elevators And Escalators - Interpretations No. 6
Asme-a17.3 Interpretations To A17.3-1996 Safety Code For Existing Elevators And Escalators - Includes Interpretations No. 1 Through 6
Asme-a90.1 Interpretations To Asme A90.1-1997
Asme-ag-1 Code On Nuclear Air And Gas Treatment - Errata: 02/04; Addenda: 09/30/05
Asme-aia-march-99 Organizations Holding Authorized Inspection Agency Certificates Of Accreditation
Asme-app-index Applicability Index For Section Xi Cases Supp 7
Asme-as-11 Personnel Of Codes, Standards, And Related Conformity Assessment Committees
Asme-b1.15 Unified Inch Screw Threads (unj Thread Form) - Errata - March 1997
Asme-b107.100 Wrenches - Incorporating B107.6, B107.9, B107.39 And B107.40
Asme-b107.14 Hand Torque Tools (mechanical)
Asme-b107.16m Shears (metal Cutting, Hand)
Asme-b107.21 Wrench, Crowfoot
Asme-b107.22m Electronic Cutters - Errata - May 1999
Asme-b107.29 Electronic Tester, Hand Torque Tools
Asme-b107.38m Electronic Pliers
Asme-b107.4 Driving And Spindle Ends For Portable Hand, Impact, Air, And Electric Tools (percussion Tools Excluded)
Asme-b107.45 Ripping Chisels And Flooring/electricians-?chisels
Asme-b107.48 Metal Chisels, Punches, And Drift Pins
Asme-b15.1 Interpretations To B15.1-2000 Safety Standard For Mechanical Power Transmission Apparatus
Asme-b16.4 Interpretations To B16.4-1998 - Gray Iron Threaded Fittings - Classes 125 And 250
Asme-b16.40 Manually Operated Thermoplastic Gas Shutoffs And Valves In Gas Distribution Systems - Erratum: July 2003 Now Incorporated (pg 'v')
Asme-b18.2.1 Square And Hex Bolts And Screws (inch Series) - Addenda A - 10/08/1999; Erratum July 2003
Asme-b18.2.3.2m Metric Formed Hex Screws
Asme-b18.2.7.1m Metric 12-spline Flange Screws - Erratum 12/2002
Asme-b18.5.2.1m Metric Round Head Short Square Neck Bolts - Erratum - October 2001; Erratum - May 2003
Asme-b18.8.1 Clevis Pins And Cotter Pins (inch Series) - Errata - April 1995
Asme-b1-tech-rept Measurement Uncertainty For 60 Deg. Screw Thread Gage Element Measurement (inch And Metric)
Asme-b20.1 Safety Standard For Conveyors And Related Equipment - Revision Of Asme B20.1-2000
Asme-b29.10m Heavy Duty Offset Sidebar Power Transmission Roller Chains And Sprocket Teeth
Asme-b29.15m Steel Roller Type Conveyor Chains, Attachments, And Sprocket Teeth
Asme-b29.21m 700 Class Welded Steel And Cast Chains, Attachments And Sprockets For Water And Sewage Treatment Plants
Asme-b29.26m Fatigue Testing Power Transmission Roller Chain - Errata October 2002
Asme-b30.14 Side Boom Tractors
Asme-b30.6 Interpretations To B30.6-1995 Derricks
Asme-b30.9 Slings
Asme-b30.9 Interpretations To B30.9-1996 Slings
Asme-b31.1 Interpretations To B31.1-1998 Power Piping - Includes Interpretations No. 2 Through 6, 8 Through 10, 13,15, 17 Through 25, And 27 Through 31
Asme-b31.1-cases-no.-26 Cases No. 26 To B31.1 Power Piping
Asme-b31.3 Interpretations To B31.3-1999 Process Piping - Includes Interpretations No. 1 Through 18
Asme-b31.5 Refrigeration Piping And Heat Transfer Components - Addenda: 2004
Asme-b31.8 Gas Transmission And Distribution Piping Systems
Asme-b31.8 Interpretations No.11 To B31.8 Gas Transmission And Distribution Piping Systems
Asme-b32.100 Preferred Metric Sizes For Flat, Round, Square, Rectangular, And Hexagonal Metal Products
Asme-b40.100 Pressure Gauges And Gauge Attachments - Incorporating Asme B40.1-1998 And Asme B40.7-1998; Addenda A - 12/31/2001
Asme-b40.200 Thermometers, Direct Reading And Remote Reading - Addenda A:2003
Asme-b47.1 Gage Blanks - Revision Of Ansi/asme B47.1am-1982
Asme-b5.54 Methods For Performance Evaluation Of Computer Numerically Controlled Machining Centers - K
Asme-b56.1 Interpretations To B56.1 Safety Standard For Low Lift And High Lift Trucks
Asme-b56.6 Safety Standard For Rough Terrain Forklift Trucks - Errata 3/2003
Asme-b56.9 Interpretations To B56.9-1992 Safety Standard For Operator Controlled Industrial Tow Tractors
Asme-b73.1 Specification For Horizontal End Suction Centrifugal Pumps For Chemical Process - Replaces B73.1m
Asme-b73.3 Specification For Sealless Horizontal End Suction Metallic Centrifugal Pumps For Chemical Process
Asme-b89.1.9 Gage Blocks - Errata: 12/2003
Asme-b89.6.2 Temperature And Humidity Environment For Dimensional Measurement
Asme-b89.7.4.1 Measurement Uncertainty And Conformance Testing: Risk Analysis
Asme-b89-tech-paper Space Plate Test Recommendations For Coordinate Measuring Machines
Asme-b89-tech-rept Parametric Calibration Of Coordinate Measuring Machines - Errata March 2002
Asme-b94.33.1 Jig Bushings (metric)
Asme-b94.35 Drill Drivers, Split-sleeve, Collet Type