PR252015 UseISOCalculations reports the wrong out of tolerance value when usi

huangyhg

UseISOCalculations reports the wrong out of tolerance value when using Legacy Surface Profile
<< Doug Sjogren  --  12/04/07  10:50:59>>
The customer has hundreds, possibly thousands of existing programs that were created prior to the new GD&T tools.  They are using the UseISOCalculations option and this works fine in the new style GD&T
Look at the dimension below.  The OOT value is reported as 0.0140" , whereas it is reported as 0.004" in the new style.  
With the USeIso, the 0.0240" Meas value should be compared to the 0.0200" tolerance band for form.  
They need this fixed and added to 4.2 MR2.

LEGACY
DIM PROF20= PROFILE OF SURFACE OF SET SCN1    FORMANDLOCATION  UNITS=IN ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS        DEV        OUTTOL        MAX        MIN
M      0.0000            0.0100     0.0100     0.0240      0.0240     0.0140           0.0120     0.0100 ----------------->
<<END>>

<< Changes made by Neil Kay -- 12/12/08  09:24:06>>
Action:  Wade Burton to Yanhua Huang, Assigned:  Don Turcotte to CMM Group
<<END>>
<< Don Turcotte  --  09/10/08  09:20:31>>
Merged into V431.
Files inserted to server
------------------------
V431\DIMENS\BASIC_DI.CPP
<<END>>
<< Changes made by Don Turcotte -- 09/10/08  09:21:18>>
Action:  Don Turcotte to Wade Burton, Status:  OPEN to REVIEW
<<END>>
<< Tim Wernicke  --  09/09/08  16:34:42>>
Hi Don, please go ahead in V431 per my e-mail.  Thanks.
<<END>>
<< Changes made by Tim Wernicke -- 09/09/08  16:35:34>>
Action:  Wade Burton to Don Turcotte, Status:  REVIEW to OPEN, Priority:  Critical to Stop Rel.
<<END>>
<< Changes made by Neil Kay -- 07/23/08  14:25:11>>
Action:  David Petrizze to Wade Burton
<<END>>
<< Changes made by Don Turcotte -- 01/17/08  15:17:45>>
Action:  Don Turcotte to David Petrizze, Status:  OPEN to REVIEW
<<END>>
<< Don Turcotte  --  01/17/08  15:09:57>>
Fixed in V42 beta , V43B, V44B.
Files inserted to server
------------------------
V42\DIMENS\BASIC_DI.CPP
V43B\DIMENS\BASIC_DI.CPP
V44B\DIMENS\BASIC_DI.CPP
<<END>>
<< Changes made by Tim Wernicke -- 12/05/07  10:24:05>>
Category:  dimensions to GD&T, Action:  Tim Wernicke to Don Turcotte, Assigned:   to Don Turcotte, Priority:  to Critical
<<END>>