PR240975 The change of Report Axis (for example some features), doesn't have

huangyhg

The change of Report Axis (for example some features), doesn't have effect.

<< Domenico Varacalli  --  05/29/06  17:54:47>>
I try to modify same Report Axis, (gif 1). For example I want the first 5 features with the X Report Axis only. (gif 2). But nothing change, when I press OK button. The results is as before (X,Y & Z).
Instead, if I modify only the last feature (CIR8, gif 3), the changes are made on all the features. (gif 4). Is this operation correct? Why I cannot separately select the Axis for every feature?
<<END>>


<< Changes made by Neil Kay -- 12/12/08  09:23:32>>
Action:  Paola Pallo to Yanhua Huang, Assigned:  Paola Pallo to CMM Group
<<END>>
<< Neil Kay  --  07/22/08  19:42:17>>
Paola?
<<END>>
<< Don Turcotte  --  09/14/06  09:17:44>>
Reviewed.
Paola,
I noted two issues :
1.  The following line in the FeatCtrlFrmDlg constructor is incorrect :
  m_pFCF->CopyAxesList(*m_pFCF);
It should be
  m_pFCF->CopyAxesList(*pFCF);
All the other changes for CopyAxesList(...) are ok.
2.  If I multi-select CIR1, CIR2, CIR3, CIR4 in the axes list on the advanced page and turn off reporting Y and Z, then press OK, everything works correctly.  If I multi-select CIR1, CIR2, CIR3, CIR4 in the axes list and turn off reporting Y and Z, then select CIR5, CIR6 to turn off only Z, then press ok, what I get is CIR1 has only X (correct), CIR2, CIR3, CIR4 have X,Y,Z (wrong), CIR5, CIR6 have only X,Y (correct).
<<END>>
<< Changes made by Don Turcotte -- 09/14/06  09:17:57>>
Action:  David Petrizze to Paola Pallo
<<END>>
<< Changes made by Don Turcotte -- 09/14/06  09:17:44>>
Action:  Don Turcotte to David Petrizze
<<END>>
<< Paola Pallo  --  07/19/06  14:07:45>>
Fixed.
Changes in ReportAxes selection are applied to selected features now, and you can see them in EW immediately , but as usual for the Report Window you have to redraw it.
For review:
Files inserted to server
------------------------
V42\DIMENS\FCFGRIDCTRL.CPP
V42\DIMENS\FEATCTRLFRM.CPP
V42\MENU\FEATCTRLFRMDLG.CPP
V42\MENU\FEATCTRLFRMOUTPUTDLG.CPP
<<END>>
<< Changes made by Paola Pallo -- 07/19/06  14:08:09>>
Action:  Paola Pallo to Don Turcotte, Status:  OPEN to REVIEW
<<END>>
<< Paola Pallo  --  07/18/06  17:51:18>>
I had to rework the Advanced dialog to allow playing with Axes selected/ unselected on one or more features. Spent quite time on testing to double check it ( I will  uploaded tomorrow morning)
<<END>>
<< Paola Pallo  --  07/17/06  17:44:12>>
Investigating .
<<END>>
<< Changes made by Tim Wernicke -- 05/30/06  10:59:38>>
Priority:  to High
<<END>>