PR255447-MYCRONA: Nominal values change during program run

huangyhg

MYCRONA: Nominal values change during program run
<< Paola Pallo  --  01/23/09  15:54:53>>
Merged in v432 per Tim's permission
<<END>>
<< Changes made by Paola Pallo -- 01/23/09  15:56:00>>
Action:  Paola Pallo to David Petrizze, Status:  OPEN to REVIEW
<<END>>
<< Paola Pallo  --  01/23/09  15:39:32>>
#249287 is the old PR I'm referring below
<<END>>
<< Tim Wernicke  --  01/23/09  08:38:09>>
Hi Paola, please merge into V432 per our Skype.  Thanks.
<<END>>
<< Changes made by Tim Wernicke -- 01/23/09  08:38:14>>
Action:  David Petrizze to Paola Pallo, Status:  REVIEW to OPEN, Priority:  High to Stop Rel.
<<END>>
<< Paola Pallo  --  01/23/09  14:00:09>>
Fixed.
This is an unwanted side effect of a code modification added per 255447 : now I  rolled it back .
I added also some notes in 255447.
For review
------------------------
V44B\CONSFEAT\GEN_CONS.CPP
V44B\MENU\DIMENSIO.CPP
Tim, I would recommend the fix in v432.
<<END>>
<< Changes made by Paola Pallo -- 01/23/09  14:01:41>>
Action:  Paola Pallo to David Petrizze, Status:  OPEN to REVIEW
<<END>>
<< Don Ruggieri  --  01/20/09  14:51:04>>
Thanks to Christian Furnival and Mark Stalker, this problem is more easily evident in the program included in 01202009_01a.zip.  I tried in with last night's v44b.  Open the program and note that the two dimensions DIST1 and LOC1 have nominal values of exactly 7.000.  When you execute the program off-line, these values then change to 7.03881.
<<END>>
<< Changes made by Don Ruggieri -- 01/20/09  14:51:34>>
Action:  Yanhua Huang to Paola Pallo, Assigned:  Yanhua Huang to Paola Pallo
<<END>>
<< Don Ruggieri  --  01/19/09  15:21:29>>
I tried multiple times to repeat the problem in both V432 and V44, but cannot.  I keep getting application errors.  I sent a note to Stefan asking for more help, specifically off-line and without Vision.
<<END>>
<< Yanhua Huang  --  01/19/09  22:41:28>>
Don R,
Could you help me to reproduce the PR?
yanhua
<<END>>
<< Yanhua Huang  --  01/19/09  22:39:04>>
Could not reproduce the issue in V44B. When open the test PP (Abschlusskappe - F1-240303 - 1.PRG),  ABST_POS2B nominal = 0.01806
<<END>>
<< Changes made by Yanhua Huang -- 01/06/09  20:48:02>>
Action:  Stefan Hombach to Yanhua Huang
<<END>>
<< Stefan Hombach  --  01/06/09  10:04:13>>
Problems is still an issue in v44b dated 19/11/08.
It seems to be related to generic features.
<<END>>
<< Changes made by Stefan Hombach -- 01/06/09  10:04:18>>
Status:  MOREINFO to OPEN
<<END>>
<< System Administrator  --  2008/10/23  17:35:30>>
PLEASE VERIFY THAT THIS IS AN ISSUE IN PC-DMIS 4.4 AUDIT VERSION.  IF SO, PLEASE RESET THE STATUS TO OPEN.  OTHERWISE PLEASE CLOSE.
<<END>>
<< Changes made by System Administrator  --  2008/10/23  17:35:30>>
Action:  Yanhua Huang to Stefan Hombach, Status:  OPEN to MOREINFO
<<END>>
<< Changes made by Neil Kay -- 08/29/08  09:52:10>>
Action:  Paola Pallo to Yanhua Huang, Assigned:  Paola Pallo to Yanhua Huang
<<END>>
<< Changes made by Neil Kay -- 06/20/08  09:56:59>>
Action:  Tim Wernicke to Paola Pallo, Status:  MOREINFO to OPEN
<<END>>
<< Changes made by Bill Wilcox -- 06/19/08  16:02:08>>
Action:  Bill Wilcox to Tim Wernicke
<<END>>
<< Stefan Hombach  --  06/19/08  16:03:45>>
Here are the requested files - no CAD file.
<<END>>
<< Changes made by Stefan Hombach -- 06/19/08  16:04:21>>
Action:  Stefan Hombach to Bill Wilcox
<<END>>
<< Bill Wilcox  --  06/18/08  15:23:38>>
Hi Stefan, it wastes a lot of time when you log a report without all the data. Please attach the part program, cad file and probe file to this report so that we can investigate. A dump of your registry settings is also helpful.
<<END>>
<< Changes made by Bill Wilcox -- 06/18/08  15:23:47>>
Action:  Paola Pallo to Stefan Hombach, Status:  OPEN to MOREINFO
<<END>>
<< Changes made by Tim Wernicke -- 06/18/08  00:21:05>>
Action:  Tim Wernicke to Paola Pallo
<<END>>
<< Stefan Hombach  --  06/17/08  09:14:07>>
Hi Tim,
I think you talk about the F5 settings.
I can't find Reset Nominals when Branching, but Reset global settings when Branching. It's tagged.
<<END>>
<< Changes made by Stefan Hombach -- 06/17/08  09:14:09>>
Action:  Paola Pallo to Tim Wernicke
<<END>>
<< Tim Wernicke  --  06/16/08  17:17:28>>
What is Reset Nominals when Branching set to?
<<END>>
<< Changes made by Tim Wernicke -- 06/16/08  17:17:30>>
Action:  Tim Wernicke to Paola Pallo, Assigned:   to Paola Pallo, Priority:  to High
<<END>>

huangyhg

Hi Christian,



Could you please take over here as this is specific to Vision and you have the correct hardware there to test with?



Thanks,



Tim





From: Don Ruggieri
Sent: Monday, January 19, 2009 2:21 PM
To: Stefan.Hombach@Mycrona.de
Cc: Yanhua HUANG; Tim Wernicke
Subject: problem report #255447



Hello Stefan,



Yanhua asked to me to help her diagnose this problem.  I’ve downloaded the attachments from the report and have made several attempts to use the program off-line in both V43MR2 and V44b.  I have been getting a lot of application errors, which may be a problem in itself but it does nothing to help me diagnose your issue.  The program you provided has multiple probe files of various technologies, and includes a variety of feature types as well.



Could you help us to narrow this down a bit by eliminating some of these factors.  If you could perhaps repeat the problem without using Vision probes, that would be a big help.    Even better, if you can repeat the problem off-line, it would be much easier to repeat and then diagnose.



Right now, we are getting nowhere with it, as we can’t duplicate the original problem.



Thank you,

Don