几何尺寸与公差论坛

 找回密码
 注册
查看: 420|回复: 0

rain-on-snow surcharge on tanks

[复制链接]
发表于 2009-9-15 16:18:23 | 显示全部楼层 |阅读模式
rain-on-snow surcharge on tanks
i would like to get feedback on asce's requirement for rain-on-snow surcharge loads on tanks, say tall silo tanks. is this required?  section 7.10 of asce 7-05 states that, "for locations where pg is 20 psf or less, but not zero, all roofs with slopes (in deg) less than w/50 with w in feet shall have a 5 psf rain-on-snow surcharge."  w is the horiz dist from eave to ridge in feet.
my pg is 14.5 psf, and my tank is 20 feet in diameter with a slope of 13 degrees, from eave and meeting at the center of the roof tank.  my w/50 would be 10/50 = 0.2 degree.  my tank roof slope is 13 degree.  according to asce, i do not need the rain-on-snow surcharge, is that right?
thank you so much for your advice and feedback.
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|Archiver|小黑屋|几何尺寸与公差论坛

GMT+8, 2025-1-16 13:07 , Processed in 0.036738 second(s), 19 queries .

Powered by Discuz! X3.4 Licensed

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表