【转帖】removing fillet edges in drawings

yang686526

removing fillet edges in drawings
hi all, quick question:
when i create drawings from parts that have a lot of fillets, the edges of the fillets are imported into the drawings. is there any way to stop this happening other than to use the 'hide edge' button to manually remove each one?
thanks
check out our whitepaper library.
if you mean the line that is displaying the tangent edge of a fillet, just right click somewhere in the view and under "tangent edges", choose "tangent edges removed".  this will apply to the whole view.
timelord
rmb the drawing view and select "tangent edges."  you are given three options for how they can be displayed.  this can also be set at the template level.
joe
sw office 2008 sp5.0
p4 3.0ghz 3gb
ati firegl x1
sixmillionways,
   are you talking about the tangent edges?
   you have the option on each view, of not showing these.
               jhg
and if the above does not work, select on the edge, right-click, hide.
chris
solidworks/pdmworks 08 3.1
autocad 08
you can also setup a drawing configuration and suppress all of your fillets. they won't import at all into the drawing if you do that.
great, thanks all.