grouted masonry cells

huangyhg

grouted masonry cells
can anyone point me to a table that gives weights of different thickness cmu walls with various cells grouted (8" oc, 16" oc, 24" oc, 32" oc, etc.)?

there are tables in the back of the reinforced masonry engineering handbook.
also, here
also, i find a lot of helpful information at
thanks guys!
i typically use properties found in ncma tek 14-1a (issued 2003). it breaks down the properties for both average cross-section (stiffness) and net cross-section (stress calculations).
it's also covered in asce7-02 table c3.1 "minimum design dead loads"