PR 259073 Create FCF TP with datum of size. Line1 nominal dia is ok, but go

huangyhg

Create FCF TP with datum of size.  Line1 nominal dia is ok, but go to Advanced tab and return, then Line1 dia is that of datum
<< Don Turcotte  --  01/14/09  15:39:33>>
Create FCF TP with datum of size.  Line1 nominal dia is ok, but go to Advanced tab and return, then Line1 dia is that of datum and no longer the dia of the considered feature as it should be.
Also if F9 on existing FCF TP, line1 shows dia of 16 although edit window has correct dia of 64 and graphics window callout shows 64.
Steps to reproduce:
Load attached program.
Create FCF TP on CNF1 with datum A.
Note that line 1 dia is 64.
Go to Advanced tab
Note that DF dia is 64, D1 dia is 16
Return to main FCF editor tab.
Results:
Line1 dia is now 16.
Expected Results:
Line 1 should show dia of considered feature(s)
<<END>>


<< Changes made by Neil Kay -- 02/25/09  19:20:31>>
Action:  David Petrizze to Yanhua Huang
<<END>>
<< Don Turcotte  --  01/14/09  16:48:51>>
This was caused by the changes to add the radius (RF) option to line1.
Files inserted to server
------------------------
V44B\MENU\FEATCTRLFRMOUTPUTDLG.CPP
<<END>>
<< Changes made by Don Turcotte -- 01/14/09  16:49:00>>
Action:  Don Turcotte to David Petrizze, Status:  OPEN to REVIEW
<<END>>
<< Changes made by Don Turcotte -- 01/14/09  16:48:51>>
Priority:  to Critical
<<END>>
<< Changes made by Tim Wernicke -- 01/14/09  15:42:53>>
Priority:  to Critical
<<END>>