几何尺寸与公差论坛

 找回密码
 注册
查看: 421|回复: 0

metal deck attachmen

[复制链接]
发表于 2009-9-10 13:39:13 | 显示全部楼层 |阅读模式
metal deck attachment
we have a very small hanging load (~50lbs)that will be supported by a 22 gauge metal roof deck.  does anybody have a bracket or hanger that would screw to the underside of the roof deck and can support a wire rope type hanging load.

know any mechanical contractors?
they always seem to be hanging ductwork with toggle type bolts through roof deck.
i tell them they can't hang loads from the deck, but that only seems to make them stop long enough till i leave the job site.  
there are a bunch of fasteners that may solve your problem..
check with simpson, usp, mcmaster-carr, grainger, itw or even lowes.
but be careful not to penetrate your roof deck or you will have more problems --- like rain water leaks!!
regardless of how small the load may be, i try to avoid relying on tensile capacity of a screw through sheet metal.  i would put a small bent clip angle that is screwed to the web of the roof deck so the screw acts partially in shear.
unistrut. really nice system. might even work between 2 joists.
threaded eyebolt with nuts and lockwashers top and bottom.  all materials hot-dipped galvanized.   
mike mccann
mmc engineering
we've exhausted the uni-strut option...or, shall i say the architect has eliminated it.  we all know this is done all the time with electrical and mechanical contractors, i thought somebody may have a unique clip with some allowable capacities.  thanks.
if it is to be specified on a new structure, how about a bluebanger with an eyebolt?  if it is existing, this won't work.
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|Archiver|小黑屋|几何尺寸与公差论坛

GMT+8, 2025-1-20 01:25 , Processed in 0.037431 second(s), 20 queries .

Powered by Discuz! X3.4 Licensed

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表