几何尺寸与公差论坛

 找回密码
 注册
查看: 5200|回复: 3

PC-DMIS hot key一览表

[复制链接]
发表于 2007-2-8 22:14:18 | 显示全部楼层 |阅读模式
 楼主| 发表于 2007-2-8 22:23:21 | 显示全部楼层

回复: PC-DIMS hot key一览表

Ctrl + Left Click Click on feature in the graphic window, will jump to feature in edit







window.



Ctrl + F1 Translate mode.

Ctrl + F2 Rotate 2D (in graphics window) Toggle bookmarks (in edit).

Ctrl + F3 Rotate 3D.

Ctrl + F4 Program Mode.

Ctrl + F5 Curves and surfaces toggle.
Ctrl + A Highlights all the text in the edit window.
Ctrl + B Toggle breakpoint on/off.
Ctrl + C Copies highlighted text to clipboard.

Ctrl + D Deletes last feature, or feature that cursor is inside.

Ctrl + E Executes last measured feature or feature with cursor in front of

or inside.

Ctrl + F Auto features dialog box.

Ctrl + G Insert a read point.

Ctrl + H Take a probe hit at current location.

Ctrl + K Keeps most recently measured dimension.

Ctrl + L Runs block of highlighted section of code (Ctrl + E does this

also)

Ctrl + N Displays new part program dialog box.

Ctrl + M Inserts a move point.

Ctrl + O Displays the open file dialog box.

Ctrl + P Displays the print dialog box.

Ctrl + Q Executes from the beginning of the program.

Ctrl + R Rotate box.

Ctrl + T Master/Slave mode toggle.

Ctrl + U Executes program from cursor.

Ctrl + V Pastes clipboard.

Ctrl + W Displays probe position dialog box.

Ctrl + X Cuts highlighted text.

Ctrl + Y Executes program from a specified location.

Ctrl + Z Scale to fit (graphics window).

Alt + - Deletes last hit.

Alt + F3 Displays edit window search box.

Alt + Z DCC mode.

Ctrl + Alt + A Displays the alignment utility box.

Ctrl + Alt + P Displays the probe utility box.

Ctrl + End Takes you to the end of the program.

Ctrl + Home Takes you to the beginning of the program.

F1 Help.

F2 Displays the expression builder box.

F3 Mark/Unmark toggle.

F4 Prints the edit window.

F5 Displays the setup options dialog box.

F6 Displays the font selection box.

F7 Toggle fields.

F8 Toggle backward.





F9 Displays the feature dialog box.







F10 Displays the parameters options box.



Shift + F3 Will mark all.

Shift + F10 Displays the jump box.







——摘自于 PC-DIMS hot key一览表
发表于 2008-3-4 08:30:31 | 显示全部楼层

回复: PC-DIMS hot key一览表

1. Alt + F3 查找 in edit window
2. Ctrl + w 显示Read Out
发表于 2008-5-23 21:40:33 | 显示全部楼层

回复: PC-DIMS hot key一览表

Ctrl + E Executes last measured feature or feature with cursor in front of

or inside.

Ctrl + Q Executes from the beginning of the program.

Ctrl + U Executes program from cursor.

Ctrl + Y Executes program from a specified location.
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|Archiver|小黑屋|几何尺寸与公差论坛

GMT+8, 2024-3-28 22:46 , Processed in 0.039875 second(s), 19 queries .

Powered by Discuz! X3.4 Licensed

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表