PR 257224 Cannot Modify Different tolerance for different attributes

huangyhg

Cannot Modify Different tolerance for different attributes
<< Emily ODea  --  09/23/08  17:13:24>>
<<END>>
<< Emily ODea  --  09/23/08  17:13:09>>
Need to: Select dimensions in the program and modify different tolerances for X,Y,Z value
Steps to reproduce:
Highlight a dimension location in a program
Press on F9
Apply a tolerance of 0.001 for X
Tolerance of 0.002 for Y
Tolerance of 0.003 for Z
Click on Crate
Results:
The tolerances are not modified at all.
Expected Results:
To be able to input different tolerances for X,Y,Z and have them applied.
<<END>>


<< Jared Hess (Development Notes)  --  04/08/09  23:11:35>>
This has been addedtoreadme for v44 (or ignored if internal item).
<<END>>
<< Changes made by Yanhua Huang -- 03/28/09  11:15:31>>
Action:  CMM Group to Yanhua Huang
<<END>>
<< Don Turcotte  --  09/29/08  11:35:39>>
The issue here is that the setting for ALL was overwriting the settings for individual axes.  I have fixed this in V43B and V44B.
Files inserted to server
------------------------
V43B\DIMENS\START_LO.CPP
V43B\MENU\DIMLOCDL.CPP
V44B\DIMENS\START_LO.CPP
V44B\MENU\DIMLOCDL.CPP
<<END>>
<< Changes made by Don Turcotte -- 09/29/08  11:35:53>>
Action:  Don Turcotte to CMM Group, Status:  OPEN to REVIEW
<<END>>
<< Changes made by Tim Wernicke -- 09/25/08  18:31:47>>
Action:  Tim Wernicke to Don Turcotte, Assigned:   to Don Turcotte, Status:  MOREINFO to OPEN, Priority:  to Critical
<<END>>
<< Emily ODea  --  09/25/08  09:12:03>>
Please see attached docs
<<END>>
<< Changes made by Emily ODea -- 09/25/08  09:12:08>>
Action:  Emily ODea to Tim Wernicke
<<END>>
<< Tim Wernicke  --  09/24/08  00:03:13>>
It seems to work fine here.  Please attach an example program.
<<END>>
<< Changes made by Tim Wernicke -- 09/24/08  00:03:33>>
Action:  Tim Wernicke to Emily ODea, Status:  OPEN to MOREINFO
<<END>>