PR 253503 outtol should show deg/min/sec as + or -

huangyhg

<< Don Turcotte  --  02/26/08  10:26:29>>
From Mike Wilson:

"Dear Mr. Mike,

Global Performance: 9208, S.NO:0907 -6309 , Controller FBII

SOFTWARE: PCDMIS CAD version 4.2mr1





Customer required OUTTOL values with polarity sign either – or + in pcdmis version 4.2 MR1.  Guide me if any settings required.

Our report:

AX        MEAS     NOMINAL       +TOL       -TOL        DEV     OUTTOL

A   119°51'28"  120°00'00"   0°06'00"   0°06'00"  -0°08'32"   0°02'32" <-------



AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL

M      43.623     43.400      0.000      0.000      0.223      0.223 ------->



Customer requirement:



AX        MEAS     NOMINAL       +TOL       -TOL        DEV     OUTTOL

A   119°51'28"  120°00'00"   0°06'00"   0°06'00"  -0°08'32"   -0°02'32" <-------



AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL

M      43.623     43.400      0.000      0.000      0.223      + 0.223 ------->





Regards,

V. Giritharan

Sales & Application

HMI

"
<<END>>


<< Changes made by Yanhua Huang (Field Changes) -- 05/19/09  16:14:45>>
Action:  Wade Burton to Yanhua Huang
<<END>>
<< Don Turcotte  --  09/10/08  09:34:22>>
Merged into V431.
Files inserted to server
------------------------
V431\DIMENS\BASIC_DI.CPP
<<END>>
<< Changes made by Don Turcotte -- 09/10/08  09:34:42>>
Action:  Don Turcotte to Wade Burton, Status:  OPEN to REVIEW
<<END>>
<< Tim Wernicke  --  09/09/08  16:36:01>>
Hi Don, please go ahead in V431 per my e-mail.  Thanks.
<<END>>
<< Changes made by Tim Wernicke -- 09/09/08  16:36:12>>
Action:  Wade Burton to Don Turcotte, Status:  REVIEW to OPEN, Priority:  Critical to Stop Rel.
<<END>>
<< Changes made by Neil Kay -- 07/23/08  15:05:59>>
Action:  David Petrizze to Wade Burton
<<END>>
<< Mike Wilson  --  03/07/08  14:54:51>>
Tested and verified fixed in v43b
<<END>>
<< Mike Wilson  --  03/07/08  09:24:01>>
Please merge this into 43r
<<END>>
<< Don Turcotte  --  02/27/08  11:32:29>>
The outtol value (if not 0.0), now has the same sign as the deviation.
Fixed in V43B and V44B.
Files inserted to server
------------------------
V43B\DIMENS\BASIC_DI.CPP
V44B\DIMENS\BASIC_DI.CPP
<<END>>
<< Changes made by Don Turcotte -- 02/27/08  11:32:46>>
Action:  Don Turcotte to David Petrizze, Status:  OPEN to REVIEW
<<END>>
<< Changes made by Tim Wernicke -- 02/26/08  09:46:09>>
Priority:  to Critical
<<END>>