PR 261371 261371 - AUDI WZB - If display precision on 1 decimal places, we cu

huangyhg

261371 - AUDI WZB - If display precision on 1 decimal places, we cut of the tolerance of 0.04mm to 0.00 mm.
<< Daniel Schroepfer -- 04/24/09 09:41:37>>
Hi Tim,
If customer uses a display precision of 1 decimal place and insert in the dimension dialog a tolerance of 0.04mm (<0.05), we cut of the tolerance to 0.0000mm. This means, that a deviation of 0.01mm is shown out of tolerance. It's only working, if the tolerance insert in the edit window.
I attached example pp, probes, aviclip
Steps to duplicate:
1. Open attached pp
2. set display precision to 1
3. open dimension dialog
4. put a tolerance of 0.04mm
5. press okay
6. change display precision to 3
Results:
We don't save the tolerance of 0.04 mm. We cut of the tolerance to 0.000mm
Expected Results:
We must save the tolerance in the background. Like in the AF Dialog. Otherwise the user get out of tolerance values, which are not there
Regards
Daniel
<<END>>

<< Changes made by Don Turcotte (Field Changes) -- 06/02/09  13:16:58>>
Action:  Don Turcotte to Yanhua Huang, Status:  OPEN to REVIEW
<<END>>
<< Changes made by Don Turcotte (Resolution Data) -- 06/02/09  13:16:51>>
** Bug Fix - New In Current Version - Previous Bug Fix was Incorrect -  -  **
<<END>>
<< Don Turcotte (Development Notes)  --  06/02/09  13:16:23>>
I have fixed the issue with F9 on existing location dimension.  The dialog now shows the plus/minus tol with full precision regardless of the DISPLAYPRECISION setting.
Files inserted to server
------------------------
V44B\DIMENS\START_LO.CPP
V44B\MENU\DIMLOCDL.CPP

<<END>>
<< Changes made by Daniel Schroepfer (Field Changes) -- 05/29/09  15:07:57>>
Action:  Daniel Schroepfer to Don Turcotte, Status:  RESOLVED to OPEN
<<END>>
<< Daniel Schroepfer (Customer Notes)  --  05/29/09  15:05:26>>
Hi Don!
I verified today and I would say it`s to 90 % fixed.
At first: setting a Tolerance of 0.04mm in the dimension dialog is working with one decimal place. Fine and Thanks also to Don.
But:
If I reopen the Dialog with F9, we show only a tolerance of 0mm. If I click then ok, we overwrite the tolerance in the pp with 0mm. This can occurse errors, when customers wants to change something with F9. For example he wants to add other axis in the dimension.
So, I don't know: should I file a new report for this? If yes , you can close this PR. The customer's expected results are, that we save the tolerance with all decimal places also in the dialog.
I attached and Aviclip of my verification in archive 090529.7z
Regards
Daniel
<<END>>
<< Changes made by Yanhua Huang (Field Changes) -- 05/27/09  18:44:19>>
Action:  Yanhua Huang to Daniel Schroepfer, Status:  REVIEW to RESOLVED
<<END>>
<< Yanhua Huang (Review Notes)  --  05/27/09  18:43:38>>
reviewed and tested in V44B, OK.
<<END>>
<< Changes made by Don Turcotte (Field Changes) -- 05/26/09  10:01:29>>
Action:  Don Turcotte to Yanhua Huang, Status:  OPEN to REVIEW
<<END>>
<< Changes made by Don Turcotte (Resolution Data) -- 05/26/09  10:01:15>>
** Bug Fix - Likely Exists in Previous Versions -  -  -  **
<<END>>
<< Don Turcotte (Development Notes)  --  05/26/09  10:00:36>>
I have uploaded my fixes for the location dimension in V44B for this problem.
Files inserted to server
------------------------
V44B\DIMENS\START_LO.CPP
V44B\INCLUDE\START_LO.H
V44B\MENU\DIMLOCDL.CPP
<<END>>

<<END>>
<< Changes made by Yanhua Huang (Field Changes) -- 05/26/09 15:59:04>>
Assigned: Yanhua Huang to Don Turcotte
<<END>>
<< Changes made by Tim Wernicke (Field Changes) -- 05/21/09 11:53:38>>
Action: Yanhua Huang to Don Turcotte
<<END>>
<< Changes made by Bret Naylor (Field Changes) -- 05/21/09 08:22:48>>
Priority: Critical to Stop Rel.
<<END>>
<< Bret Naylor (Management Notes) -- 05/21/09 08:22:47>>
Don, please go ahead and upload your fix.
<<END>>
<< Don Turcotte (Development Notes) -- 05/05/09 13:32:18>>
This is only a problem when entering the tolerance in the dialog and the Display Precision is less than the precision of the tolerance values being entered. The workaround is to create the dimensions with the Display Precision temporarily set to the precision of the tolerances being entered. After all the Location dimensions have been created, then go back and set the Display Precision to the value desired for display.
I have fixed this in V44B but cannot upload because this PR is not Stop Release.
<<END>>
<< Changes made by Tim Wernicke (Field Changes) -- 04/24/09 09:25:03>>
Action: Tim Wernicke to Yanhua Huang, Assigned: to Yanhua Huang, Priority: to Critical
<<END>>