PR 254833 Profile of a Line is Fubar - tolerance zone in the wrong place for

huangyhg

Profile of a Line is Fubar - tolerance zone in the wrong place for formonly
<< Bob Hospadaruk  --  05/07/08  16:13:24>>
Look at the very last profile dimension at the end of the program.  It is a Profile of a line, form only.  Look at the graphic in the cad window.  The tolerence zone is drawn in a completly wrong place.  it should be centered on the nominal.  I don't know if the evaluation of profile is wrong too, someone needs to check that.
This occurs with the legacy as well as with the new FCF's, verified ll the way back to v4.2 MR1.
<<END>>


<< Jared Hess (Development Notes)  --  04/08/09  22:16:14>>
This has been addedtoreadme for v44 (or ignored if internal item).
<<END>>
<< Changes made by Neil Kay -- 02/24/09  13:31:16>>
Status:  RESOLVED to CLOSED
<<END>>
<< Don Turcotte  --  08/12/08  08:32:41>>
Merged into V42R and V42 beta.
<<END>>
<< Changes made by Don Turcotte -- 08/12/08  08:32:45>>
Action:  Don Turcotte to Bob Hospadaruk, Status:  OPEN to RESOLVED
<<END>>
<< Don Turcotte  --  08/12/08  08:31:41>>
Files inserted to server
------------------------
V42R\DIMANALYSIS ACTIVEX\GraphicalAnalysis.CPP
V42R\DIMENS\GraphicalAnalysis.CPP
V42R\DLL\DIMANALYSIS ACTIVEX D.OCX
V42R\DLL\DIMANALYSIS ACTIVEX.OCX
V42\DIMANALYSIS ACTIVEX\GRAPHICALANALYSIS.CPP
V42\DIMENS\GRAPHICALANALYSIS.CPP
V42\DLL\DIMANALYSIS ACTIVEX D.OCX
V42\DLL\DIMANALYSIS ACTIVEX.OCX
<<END>>
<< Tim Wernicke  --  08/07/08  20:12:08>>
Please merge into V42R.  Major issue for Foxconn.
<<END>>
<< Changes made by Tim Wernicke -- 08/07/08  20:12:12>>
Action:  Bob Hospadaruk to Don Turcotte, Status:  RESOLVED to OPEN
<<END>>
<< Don Turcotte  --  05/14/08  09:25:15>>
Merged into V43R and V431

Files inserted to server
------------------------
V43R\DIMANALYSIS ACTIVEX\GraphicalAnalysis.CPP
V43R\DIMENS\GraphicalAnalysis.CPP
V43R\DLL\DIMANALYSIS ACTIVEX D.OCX
V43R\DLL\DIMANALYSIS ACTIVEX.OCX
V43R\DLL\DIMANALYSIS ACTIVEX.pdb
V431\DIMANALYSIS ACTIVEX\GraphicalAnalysis.CPP
V431\DIMENS\GraphicalAnalysis.CPP
V431\DLL\DIMANALYSIS ACTIVEX D.OCX
V431\DLL\DIMANALYSIS ACTIVEX.OCX
V431\DLL\DIMANALYSIS ACTIVEX.pdb
<<END>>
<< Changes made by Don Turcotte -- 05/14/08  09:25:46>>
Action:  Don Turcotte to Bob Hospadaruk, Status:  OPEN to RESOLVED
<<END>>
<< Bill Wilcox  --  05/13/08  23:24:20>>
Hi Don, please fix in V43r and V431
<<END>>
<< Changes made by Bill Wilcox -- 05/13/08  23:24:21>>
Action:  Bob Hospadaruk to Don Turcotte, Status:  RESOLVED to OPEN, Priority:  Critical to Stop Rel.
<<END>>
<< David Petrizze  --  05/13/08  00:33:09>>
Reviewed.
<<END>>
<< Changes made by David Petrizze -- 05/13/08  00:33:11>>
Action:  David Petrizze to Bob Hospadaruk, Status:  REVIEW to RESOLVED
<<END>>
<< Don Turcotte  --  05/08/08  13:27:15>>
This is a continuation of this PR (# 254323  - Profile "Form Only" not reporting correctly).  I fixed this PR so form only now includes size but the graphical analysis is still drawing the tol lines centered on the midpoint between the max and min deviations and not centered on the nominal.
I have fixed this in V43B and V44B.  This is a candidate for V43 MR1.
Files inserted to server
------------------------
V43B\DIMANALYSIS ACTIVEX\GRAPHICALANALYSIS.CPP
V43B\DIMENS\GraphicalAnalysis.CPP
V43B\DLL\DIMANALYSIS ACTIVEX D.OCX
V43B\DLL\DIMANALYSIS ACTIVEX.OCX
V43B\DLL\DIMANALYSIS ACTIVEX.pdb
V44B\DIMANALYSIS ACTIVEX\GRAPHICALANALYSIS.CPP
V44B\DIMENS\GraphicalAnalysis.CPP
V44B\DLL\DIMANALYSIS ACTIVEX D.OCX
V44B\DLL\DIMANALYSIS ACTIVEX.OCX
V44B\DLL\DIMANALYSIS ACTIVEX.pdb
<<END>>
<< Changes made by Don Turcotte -- 05/08/08  13:28:15>>
Action:  Don Turcotte to David Petrizze, Status:  OPEN to REVIEW
<<END>>
<< Tim Wernicke  --  05/08/08  08:32:25>>
Continuation of 254323.
<<END>>
<< Changes made by Tim Wernicke -- 05/08/08  08:32:30>>
Action:  Tim Wernicke to Don Turcotte, Assigned:   to Don Turcotte, Priority:  to Critical
<<END>>