brick veneer/metal stud
is there a height limit for a 4" inch brick veneer on metal stud (6" or 8")?
assuming anchored veneer, see ubc 1403.6.2. if you have more than 30 ft. of veneer you need to provide seperate framing to support it in zones 2, 3 and 4.
IP卡
狗仔卡
发表于 2009-9-7 16:59:11
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡