PR 260755 ANALYSISVIEW Commands display the wrong view when migrating program

huangyhg

ANALYSISVIEW Commands display the wrong view when migrating programs from: 4.2MR1 to: 4.2MR2, 4.2MR3, 4.3 and 4.3MR1
<< Rob Jensen  --  03/24/09  16:20:00>>
ANALYSISVIEW Commands display the wrong view when migrating programs from: 4.2MR1 to: 4.2MR2, 4.2MR3, 4.3 and 4.3MR1. This occurs when CAD coordinates are not the same as the machine Coordinates (changed in Setup/Part/Machine/Part Setup (see attached programs)
Steps to reproduce:
1) 4.2MR1 - Import iges file
2) Setup/Part/Machine
3) Change CAD to Part axis (see attached program)
4) Scan a surface in Z+ plane
5) Dimension Profile (legacy dimension)
6) Create Analysis View command of profile dimension (Z+ view)
7) Execute program in 4.2MR1 - Analysis View checks OK
8) Open program in 4.2MR3 and execute program
Results:
When 4.2MR1 program is executed in 4.2MR3 the Analysis View is diplayed incorrectly (it appears to be in the original CAD coordinates)
Expected Results:
Analysis View should be displayed correctly, the as in 4.2MR1. Programs created in 3.5 - 4.2MR1 should migrate to 4.2MR3 and higher without AnalysisView command errors.
<<END>>

<< Don Turcotte  --  03/25/09  15:23:26>>
I have fixed this in V42 MR3, V432 (V43 MR2), V44B.  I also fixed a problem with going back to an earlier version from V42 MR3 (or V432 or V44B).
Files inserted to server
------------------------
V42R\GRAPHSUP\VIEWSET.CPP
V432\GRAPHSUP\VIEWSET.CPP
V44B\GRAPHSUP\VIEWSET.CPP
<<END>>
<< Changes made by Don Turcotte -- 03/25/09  15:25:29>>
Action:  Don Turcotte to Yanhua Huang, Status:  OPEN to REVIEW
<<END>>
<< Changes made by Tim Wernicke -- 03/24/09  16:44:24>>
Action:  Tim Wernicke to Don Turcotte, Assigned:   to Don Turcotte, Priority:  to Stop Rel.
<<END>>