PR 260758 Invalid Number entered and Carry Nominals back to feature Warnings

huangyhg

Invalid Number entered and Carry Nominals back to feature Warnings appear (2x) when enter the minus tolerance for a diameter for Legacy True Position from the Edit Window
<< Rob Jensen  --  03/24/09  23:55:29>>
Invalid Number entered and Carry Nominals back to feature Warnings appear (2x) when entering the minus tolerance from the edit window for a diameter for Legacy True Position command in 4.2MR3. Note 4.3MR1 Carry Nominals Back to feature appears when enter a minus diameter tolerance. This also prevents diameter tolerance from carrying forward to like dimensions.
Steps to reproduce:
1) Create 2 or more  Legacy True Position dimensions for circles (from cad)
2) Enter the positive diameter tolerance from the edit window and press tab
3) Enter the minus tolerance and you will get an Invalid number entered warning. select ok and Carry Nominals back to feature appears. select OK and it repeats
Results:
Invalid number entered appears and Carry Nominals back to feature appears and then it repeats itself.
Expected Results:
Neither prompt should appear in this case.
<<END>>


<< Don Turcotte  --  03/26/09  16:19:45>>
I have fixed this in V42 MR3, V432 (V43 MR2), V44B so that changing +/- tols will prompt only "Carry tolerances forward to like tolerances" and changing the nominals will prompt "Carry nominals back to the feature".
Files inserted to server
------------------------
V42R\DIMENS\START_LO.CPP
V42R\DIMENS\TP_LOCAT.CPP
V42R\DIMENS\TP_START.CPP
V432\DIMENS\START_LO.CPP
V432\DIMENS\TP_LOCAT.CPP
V432\DIMENS\TP_START.CPP
V44B\DIMENS\START_LO.CPP
V44B\DIMENS\TP_LOCAT.CPP
V44B\DIMENS\TP_START.CPP
<<END>>
<< Changes made by Don Turcotte -- 03/26/09  16:20:18>>
Action:  Don Turcotte to Yanhua Huang, Status:  OPEN to REVIEW
<<END>>
<< Don Turcotte  --  03/25/09  17:09:54>>
This is a problem also in V432 and V44B.  I have fixed this problem.
I noted, however, there is also a problem with the "Carry tolerances forward to like tolerances" message not always being displayed when it should be.  Seems to work reliably if you move the mouse cursor to the next field, but not always when you simply tab off the changed field.  Once it is working (by moving the mouse cursor),  it works even when tabbing.
<<END>>
<< Changes made by Tim Wernicke -- 03/25/09  09:19:59>>
Action:  Tim Wernicke to Don Turcotte, Assigned:   to Don Turcotte, Priority:  to Stop Rel.
<<END>>

huangyhg

t:\V44B\DIMENS\TP_START.CPP
void CPCDtp_start_location::left_the_global_group(void)
  if ( (dimension_important_locations & ~(PLUS_TOL|MINUS_TOL)) && // PR260758 - everything but +/- tol