welded wire fabric or mesh

huangyhg

welded wire fabric or mesh
is there a difference between the term "fabric" and the term "mesh"?  i have always referred to it as fabric, but a colleague suggested that a mesh and a fabric are different terms to be used based on the gage of the wire.
check out our whitepaper library.
30 years ago, welded wire mesh was a common term... now welded wire fabric seems to be the norm... i'm not aware of any distinction.
dik
welded wire reinforcement is used by the wri.  i know of no real difference.  the wire size and all that is determined by your callout.
don't re  
sre:
not aware of that distinction... i've seen both spec'd to be in flat sheets.  my standard notes stipulate flat sheets but have changed the text from wwm to ww fabric... don't use wwf.
chain-link fences are specified as fabric of certain height, gage and fabric opening space. welded wire fabric can be bought in rolls or flat sheets, depending on the gage. crsi design handbook refers to it as welded wire fabricfff">. masonry joints are reinforced with welded wire reinforcement and it comes in strips that fit within the cmu width.  
dik - probably just the way local contractor's refer to the rolls & sheet. i have rarely used either (like fibers better).