Perpendicularity dimensions giving zero deviation with legacy & FCF

huangyhg

You can give a perpendicularity on a constructed  BF plane . CPCDoff_plane (vector, centroid) =  constructed plane { BF[ offset meas points ( centroid ), LSQ ] }
PLN2       =FEAT/PLANE,CARTESIAN,TRIANGLE,NO
            THEO/<0,0,-36.04>,<0,0,1>
            ACTL/<0,0.078,-35.971>,<-0.0037584,-0.0032181,0.9999878>
            CONSTR/PLANE,BF,LCVLE_PT,LCVTE_PT,LCCLE_PT,LCCTE_PT,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,WAVELENGTH=0
DIM PERP15= PERPENDICULARITY OF PLANE PLN2,RFS TO PLANE DATUM_B,RFS  UNITS=MM ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL
M        0.014      0.000      0.010      0.000      0.014      0.004 ->
<<END>>

This is working as designed for CPCDoff_plane. I am not sure if this is ER.
[8:31:46 PM] XXX says: Perpendicularity needs measure points to evaluate.  This does not work with constructions (except 'BF" and "BFRE") that don't have measure points.
<<END>>