几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   ISO standards (http://www.dimcax.com/hust/forumdisplay.php?f=7)
-   -   use of notes in iso (http://www.dimcax.com/hust/showthread.php?t=20370)

huangyhg 2009-09-05 07:32 PM

use of notes in iso
 
use of notes in iso
hi guys,
the drawings which i make have a lot of fillets which are most of the time the same radii.do you know if i can use a note instead of specifying it at each and every spot.


所有的时间均为北京时间。 现在的时间是 03:57 PM.