【转帖】acad 2007 crashes when plotting to custom size
 

acad 2007 crashes when plotting to custom size
acad 2007 crashes when plotting to custom size
i created a dwg file (acad 2004) with dwgdirect 2.1.0.
i can load this dwg-file (ldp_061106_10_plotcrash.dwg) in autocad 2007.
when i plot this dwg-file file autocad 2007 crashes.
in the attached jpg(custom_size_plot.jpg) you can see the plotter and the papersize i use to plot.
the plotter is oce 9600 postscript.
i use custom properties, advanced, postscript custom page size.
the page size is in millimeters, 676x1000mm.
for simulating the crash, i sometimes need to restart 2 or 3 times autocad.
i also noticed, that when the first plot in autocad is successful, autocad does not crash anymore. for simulating the crash, i load dwg and plot, if no crash, i restart autocad, load and plot.
in autocad, i saved the problem-dwg as ldp_061106_10_from_autocad.dwg.
ldp_061106_10_from_autocad.dwg can plot without problems. maybe someone can see what the difference is between both files.
i cleaned out the dwg-file as much as i could.
attached images
hi,
please, attach dxf files, not dwg. it will be very helpful. also, please, test dxf for autocad crash.
dxf-file
the attached dxf-file also crashes.
attached files (140.0 kb, 5 views)

the problem seems to be solved when installing service pack 1 from autocad