几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   精密机械 (http://www.dimcax.com/hust/forumdisplay.php?f=179)
-   -   does anyone have an example of how to use newmarks method f (http://www.dimcax.com/hust/showthread.php?t=20511)

huangyhg 2009-09-05 10:39 PM

does anyone have an example of how to use newmarks method f
 
does anyone have an example of how to use newmark's method f
does anyone have a copy of this paper and an example of how to use newmark, n.m. - "numerical procedures for computing deflections, moments and buckling loads", transactions asce, vol. 108, 1943
check out our whitepaper library.
dooron,
i don't have these materials at this time, but i have used the method in the past and i noted these references. good luck.
"numerical analysis of beam and column structures" by w. g. godden, prentice-hall,1965.
also, check out "newmark's numerical method" by n. c. lind, dept of civil engineering, university of waterloo, waterloo, ontario, canada 1975.
"numerical procedure for computing deflections,moments, and buckling loads", by nathan m. newmark, paper no 2202, asce transactions, vol 108, 1943, is newmark's original paper.
regards,
lcubed


所有的时间均为北京时间。 现在的时间是 01:18 AM.