几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   asce 7-05 figure 6-18b (http://www.dimcax.com/hust/showthread.php?t=21582)

huangyhg 2009-09-07 01:06 PM

asce 7-05 figure 6-18b
 
asce 7-05 figure 6-18b
asce 7-05, page 67, figure 8-18b (net pressure coefficient, cn for pitched free roofs) shows load case a & b. what are these cases?
thanks,

hmm..looks to be just the maximum variation in loading due to gusts at different times. it says to check all load cases, so i assume you check case a and case b for each situation. i don't see any text reference to indicate the letters actually correspond to a specific design condition, and don't see anything to indicate you'd use case a this time and case b for some other situation.
i think they are the lower and upper bounds for all possible wind flows or pressures over a pitched roof. this is similar for a house with a gable roof. try calling asce to get the explanation. good luck.


所有的时间均为北京时间。 现在的时间是 11:44 AM.