几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   brick shelf angle (http://www.dimcax.com/hust/showthread.php?t=22203)

huangyhg 2009-09-07 04:54 PM

brick shelf angle
 
brick shelf angle
how far back do you set the tip a brick shelf angle from the brick face?
hint: i have seen anywhere from 1/4" to 1 1/4".
what is your office practice?
min. 2/3 of the brick should bear on the shelf.


所有的时间均为北京时间。 现在的时间是 12:26 PM.