几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   concrete landing update (http://www.dimcax.com/hust/showthread.php?t=22915)

huangyhg 2009-09-08 12:15 PM

concrete landing update
 
concrete landing update
just thought i'd give an update on what was going on. here's the original thread that you can refer to:
yes, compactions greater than 100% are possible. re
jaefff"> is correct - compaction well in excess of 100% of the optimum dry density is achievable. at least for the existing standard compaction test standards...
i had a job a few years ago where the contractor achieved a mean relative compaction of over 99% with no accepted lift having a value less than 98%. the fill thickness was very uneven, and he didn't want there to be any potential for the owner to complain about a substandard job -


所有的时间均为北京时间。 现在的时间是 06:31 AM.