几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   old metal floor deck tables (http://www.dimcax.com/hust/showthread.php?t=26894)

huangyhg 2009-09-10 05:05 PM

old metal floor deck tables
 
old metal floor deck tables
doing some structural review of an existing steel building with castellated steel beam and concrete on metal deck.
i found that the steel beams are adequate for the new loading condition, however i am unable to find any information on the metal deck and suspect that it will not work for the new loading.
the deck is designated as nkx 16-16 alternated with sec 21-16. this is all the information i have. building was designed in 1964
i did find some info on corrugated deck with a flat steel pan that went by the designation 20-20. does anyone know which number goes with which part of the deck and what company may have used this designation.
thanks
find a job or post a job opening
nkx and sec 21 are robertson deck designations.
thanks mrengineer!
robertson's website had old deck tables available. the manf. tip was very useful.
thanks again.


所有的时间均为北京时间。 现在的时间是 05:31 PM.