几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   PC-DMIS (http://www.dimcax.com/hust/forumdisplay.php?f=52)
-   -   tp200的寿命 - 100万次 (http://www.dimcax.com/hust/showthread.php?t=3023)

huangyhg 2009-04-06 11:07 PM

tp200的寿命 - 100万次
 
tp200的寿命
一个tp200撞了多少次才会坏;我们公司有的tp200撞了好多次还没坏,是不是哪天谁倒霉轻轻一碰就坏了;哪不是很亏。tp200也有没有校正期限
excellent reeatability and recision 3d
form measurement
 raid exchange between stylus
configurations without the need to re-calibrate
 6 way measuring caability (±x, ±y, ±z)
 sf and lf modules to give overtravel
force to suit the alication
 eo module to give increased overtravel
in robe z axis
 zero reseat errors and no lobing effect
 suitable for intensive ‘eck’ or ‘stitch’
scanning
 stylus reach u to 100 mm (3.99 in) gf
range
 module life of >10 million triggers
 comact size
 comatible with the full range of
一般如果你撞它的话,那就真不知道什么时候坏了! 正常使用下寿命应该>10,000,000次的触发
回复 2f aulsar 的帖子
海克斯康的维修工程师说使用寿命为100万次,我们公司的tp200可能触发了300万次以上了,仍然在顽强地工作。


所有的时间均为北京时间。 现在的时间是 07:44 PM.