【转帖】revision
 

revision
hi
in order to mark revision changes on drawings i have a need to create what i call "revision clouds", see example in attached picture. the shape of the cloud will be different from case to case so that it exactly surrounds the change compared to the previous revision of the drawing. however once drawn the object can be totally fixed.
has anyone here made or seen a macro which does something like this? i imagine the user to click at points in each corner of the cloud and then the macro will draw arcs between these points - something similar to creating a spline.
you might ask - do i really have to do it this way? yes i do. it is a customer demand - cannot be changed (i have tried...). so please don't waste your time giving advices to other ways of marking revision changes.
jorn bjarning
cswp
cad & plm consultant
sw2008 sp5 / sw2009 sp2
edited: 07/03/2008 at 09:32 am by jorn bjarning
click for full image
jorn,
you are aware that edrawings can do this? i do not know of a macro.
charles,
i know - but thank you for your input anyway. it must however be made in the sw drawing itself.
jorn bjarning
cswp
cad & plm consultant
sw2008 sp5 / sw2009 sp2
quick