查看单个帖子
旧 2009-05-07, 05:55 PM   #1
yang686526
高级会员
 
注册日期: 06-11
帖子: 14579
精华: 1
现金: 224494 标准币
资产: 234494 标准币
yang686526 向着好的方向发展
默认 【转帖】upgrade From 1.13 To 1.14.02

upgrade from 1.13 to 1.14.02
upgrade from 1.13 to 1.14.02
hello,
i use the technic similar to odvectorizeex to display autocad drawing in our application
here's the code for my simple device class:
//---------------------------------------------------
//declaration
class wsgssimpledevice : public odgsbasevectorizedevice, public odgigeometrysimplifier, public odrxdispatchimpl<>
{
......
}
//---------------------------------------------------------
//implementation
odgsviewptr wsgssimpledevice::createview(const odgsclientviewinfo* pinfo, bool benablelayervisibilityperview)
{
odgsviewptr pview = wssimpleview::createobject();
wssimpleview* pmyview = static_cast<wssimpleview*>(pview.get());
pmyview->init(this, pinfo, benablelayervisibilityperview);
pmyview->output().setdestgeometry(*this);
return (odgsview*)pmyview;
}
//-------------------------------------------------------------------
void wssimpleview::draw(const odgidrawable* pdrawable)
{
odgsbasevectorizeview::draw(pdrawable);
}
this worked fine with 1.13. when linked with dd 1.14.02 libraries the program is crashing in draw() function above. it gives me float divide by zero exception, and the assembly code shows that it's happening in
odgsbasevectorizeview::linetypegenerationcriteria
function.
any ideas?
sincerely,
michael

most probably you forget to call odgsdevice:nsize() before updating the device. in odvectorizeex sample it is called in exgssimpledevice::exgssimpledevice().
sincerely yours,
george udov
thanks for reply
to figure out the rectangle needed i use the following:
-----------------
odgsview* pview = m_pdevice->viewat(0);
odabstractviewpeptr(pview)->zoomextents(pview);
odgeboundblock3d boundblock;
odabstractviewpeptr(pview)->viewextents(pview, boundblock);
-----------------------------------------------
after that i make rectangle from boundblock and call
m_pdevice->onsize(rect)
m_pdevice->update()
-----------------------------
the program failing on zoomextents() function, and only in the debug build (release build works fine). probably uninitialized variable somewhere in your library.
anyway i put onsize() call with arbitary rectangle in the wsgssimpledevice constructor and it did fixed the problem.
thanks,
michael

"program failing in debug build only, release build works ok" sounds very strange. most probably, i guess, the program doesn't failing - it generates assert, which indicates some problem. do you have similar asertion fail in odamfcapp sample, zoom extents code? if no, then, most probably, the problem is on your side.
sincerely yours,
george udov
debug crash
george,
i was able to duplicate this problem in dwglib 2.0.2 where it crashes in debug build only. please see thread division by "zero debug build crash " dated september 25, 2006
yang686526离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)