几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

what specs should i be concerned about?
i work for a large pump manufacturer. so my duties there are to produce their plans for most large projects and some smaller once as well. so the types of parts i draw vary.
here's a list:
motor stands
discharge heads
seal plates
base plates
sole plates
all sorts of pipe
flanges
columns
shafts
couplings
bowl assembly's
cans (part that sometimes encases pump)
t-bearings
head shafts
and things along those lines.
what specs should i be concerning myself with?
seeing more specifically what you are dealing with, i would recommend reading asme y14.5-1994. i realize that this spec is not free, but it would well be worth the investment for your company.
ok. thanks.
now all i have to do is figure out a way to convince them of the value these specs have in them. so they'll buy it.
y14.5 is the right choice for general dimensioning & tolerancing methods, and provides references to other specific standards that may be of interest under sect. 1.2. e.g. y14.8m-1989 for castings & forgings, ansi b4.2-1978, preferred metric limits & fits.
assuming you're north-american based and work under a non-iso system, you should check out the asme website
good morning all,
first, are you close to a university? if so go to the library there and make a copy. since we here in nebraska have a patent repository we also carry all the patent books and engineering specs. the library is free.
regards,
namdac
namdac,
your library may be free, but asme y14.5m-1994 is copyright. copying is not allowed.
jhg
personal use copying of a single copy is allowed by copyright laws.
however, at 230+ pages, it may be cheaper to by a copy from asme.
"wildfires are dangerous, hard to control, and economically catastrophic."
ben loosli
sr is technologist
l-3 communications
the specs can be ordered on cd or book form. i prefer to order all the specs on a cd. it makes it easier to search for a topic.
chris
systems analyst, i.s.
solidworks 06 4.1/pdmworks 06
autocad 06
back in the uk the british standards had a web site. for a yearly subscription you could access almost all the specs (some of the older ones weren't scanned in yet).
shame there doesn't seem to be equivalent for asme/ansi.
there is a web service which provides this.
ewh, i know no advertising etc but can you point us in the right direction to this service?

2009-09-05, 01:59 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	what specs should i be concerned abou what specs should i be concerned about? i work for a large pump manufacturer. so my duties there are to produce their plans for most large projects and some smaller once as well. so the types of parts i draw vary. here's a list: motor stands discharge heads seal plates base plates sole plates all sorts of pipe flanges columns shafts couplings bowl assembly's cans (part that sometimes encases pump) t-bearings head shafts and things along those lines. what specs should i be concerning myself with? seeing more specifically what you are dealing with, i would recommend reading asme y14.5-1994. i realize that this spec is not free, but it would well be worth the investment for your company. ok. thanks. now all i have to do is figure out a way to convince them of the value these specs have in them. so they'll buy it. y14.5 is the right choice for general dimensioning & tolerancing methods, and provides references to other specific standards that may be of interest under sect. 1.2. e.g. y14.8m-1989 for castings & forgings, ansi b4.2-1978, preferred metric limits & fits. assuming you're north-american based and work under a non-iso system, you should check out the asme website good morning all, first, are you close to a university? if so go to the library there and make a copy. since we here in nebraska have a patent repository we also carry all the patent books and engineering specs. the library is free. regards, namdac namdac, your library may be free, but asme y14.5m-1994 is copyright. copying is not allowed. jhg personal use copying of a single copy is allowed by copyright laws. however, at 230+ pages, it may be cheaper to by a copy from asme. "wildfires are dangerous, hard to control, and economically catastrophic." ben loosli sr is technologist l-3 communications the specs can be ordered on cd or book form. i prefer to order all the specs on a cd. it makes it easier to search for a topic. chris systems analyst, i.s. solidworks 06 4.1/pdmworks 06 autocad 06 back in the uk the british standards had a web site. for a yearly subscription you could access almost all the specs (some of the older ones weren't scanned in yet). shame there doesn't seem to be equivalent for asme/ansi. there is a web service which provides this. ewh, i know no advertising etc but can you point us in the right direction to this service? __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]