几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

anodising
i've had good results with 2024 alclad, 6061t6,and 7075.
the finish of the part is the most important aspect.
i'f you like black for a color then 40 series like 4043is
what you'll get. something to remember if your welding useing 4043 filler rod.
normally the anodising for architectural uses is 6063 t5. and it is the most available for an extrusion producer.
the structural alloys like 6061, 6261 and others don´t produce an even finishing.
each alloys has its own colour, inside the 6063 you can find a lot of sub-alloys depending the use and the fabricator. the most of these specs are related with obtain an even colour or protecting the anodising baths of contamination.
jkp

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-05, 06:37 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	anodising anodising i've had good results with 2024 alclad, 6061t6,and 7075. the finish of the part is the most important aspect. i'f you like black for a color then 40 series like 4043is what you'll get. something to remember if your welding useing 4043 filler rod. normally the anodising for architectural uses is 6063 t5. and it is the most available for an extrusion producer. the structural alloys like 6061, 6261 and others don´t produce an even finishing. each alloys has its own colour, inside the 6063 you can find a lot of sub-alloys depending the use and the fabricator. the most of these specs are related with obtain an even colour or protecting the anodising baths of contamination. jkp __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]