几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

accurate plotters
we have a plotter that is accurate but getting old and getting hard to find parts for. we have sent many files out for test plots by the plotter vendors but most were not accurate enough. has any one found a 36" or 48" wide plotter that they like and that works well from a roll on .020 thick mylar, if so please let me know before ours dies.
larry
check out our whitepaper library.
my hp 488ca designjet prints 36" wide, and i find that its factory settings make its plots accurate to 1/16" in 6 feet. it has an option to calibrate, but since it's good enough for me, i haven't played with it. not sure if hp still makes the 488...
stf
we have an hp designjet 800, and it works great. one thing to keep in mind though. before any high quality mylars are plotted, you must calibrate the plotter prior to plotting the mylar.
dennis

2009-09-05, 10:12 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	accurate plotters accurate plotters we have a plotter that is accurate but getting old and getting hard to find parts for. we have sent many files out for test plots by the plotter vendors but most were not accurate enough. has any one found a 36" or 48" wide plotter that they like and that works well from a roll on .020 thick mylar, if so please let me know before ours dies. larry check out our whitepaper library. my hp 488ca designjet prints 36" wide, and i find that its factory settings make its plots accurate to 1/16" in 6 feet. it has an option to calibrate, but since it's good enough for me, i haven't played with it. not sure if hp still makes the 488... stf we have an hp designjet 800, and it works great. one thing to keep in mind though. before any high quality mylars are plotted, you must calibrate the plotter prior to plotting the mylar. dennis __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]