几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

gyroscope manufacture
any member participate in the manufacture of gyroscopes for avionics applications. i am currently dealing with bearing failures on gyros and have been dimensionally analysing components. is there a specific material/process characteristic(s) i should be looking out for?
check out our whitepaper library.
stopwatch,
"failure" is too broad. you should find out what caused the failure, e.g., overload, overspeed, contamination, corrosion.....it's a long list, and two or more problems can combine to cause failure. the bearing will often tell you what happened.
if you can define the problem, it may be easier to find the solution.
unfortunately, the one remaining manufacturer of the gyro we used has changed 4 times in the last 10 years; and the quality has slowly degraded.
my suspicion is that the recipe is no longer followed nor understood. your best bet is to get someone to pay for a re-design to a fiber-optic gyro.
ttfn

2009-09-05, 10:53 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	gyroscope manufacture gyroscope manufacture any member participate in the manufacture of gyroscopes for avionics applications. i am currently dealing with bearing failures on gyros and have been dimensionally analysing components. is there a specific material/process characteristic(s) i should be looking out for? check out our whitepaper library. stopwatch, "failure" is too broad. you should find out what caused the failure, e.g., overload, overspeed, contamination, corrosion.....it's a long list, and two or more problems can combine to cause failure. the bearing will often tell you what happened. if you can define the problem, it may be easier to find the solution. unfortunately, the one remaining manufacturer of the gyro we used has changed 4 times in the last 10 years; and the quality has slowly degraded. my suspicion is that the recipe is no longer followed nor understood. your best bet is to get someone to pay for a re-design to a fiber-optic gyro. ttfn __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]