几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

helicoil (pull-out strength)
has anyone seen any published data on the pull-out strength
of helicoils?
erie shore consulting engineers, inc.
here's a starting point:
first off, what material are you using, is it sst! also helicoil is mfg. name and others exist..keen sert for one...............basically the o.d. thread on any insert is always larger that the i.d. thread it is replacing..so it will allways be stronger...........you should fing out what you need by reading the product manual.....helicoils came out back in the 1950's and have less applications than they used to because of the increase in engineering requirments through the years have created additional alternitives to sellect from pending your application requirements............respectfully: <
helicoil has a series of technical bulletins addressing different aspects of insert design. technical bulleting 68-2 provides tables for insert assembly strength based on the known parameters of the design (insert diameter, parent material). may be able to order from the web or call (203) 924-4722 for a copy of the bulletin.
thanks dray55w (industrial)
erie shore consulting engineers, inc.
for best results, please contact the heli-coil mfgs themselves. heli-coil is a part of emhart teknologies (owned and operated by black & decker, inc), makers of pop, dodge, p-k, and other systems and fasteners. i have worked with this group in the past and they are very helpful. the website is
thanks dugudugu (industrial)
erie shore consulting engineers, inc.

2009-09-05, 10:54 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	helicoil 9pull-out strength0 helicoil (pull-out strength) has anyone seen any published data on the pull-out strength of helicoils? erie shore consulting engineers, inc. here's a starting point: first off, what material are you using, is it sst! also helicoil is mfg. name and others exist..keen sert for one...............basically the o.d. thread on any insert is always larger that the i.d. thread it is replacing..so it will allways be stronger...........you should fing out what you need by reading the product manual.....helicoils came out back in the 1950's and have less applications than they used to because of the increase in engineering requirments through the years have created additional alternitives to sellect from pending your application requirements............respectfully: < helicoil has a series of technical bulletins addressing different aspects of insert design. technical bulleting 68-2 provides tables for insert assembly strength based on the known parameters of the design (insert diameter, parent material). may be able to order from the web or call (203) 924-4722 for a copy of the bulletin. thanks dray55w (industrial) erie shore consulting engineers, inc. for best results, please contact the heli-coil mfgs themselves. heli-coil is a part of emhart teknologies (owned and operated by black & decker, inc), makers of pop, dodge, p-k, and other systems and fasteners. i have worked with this group in the past and they are very helpful. the website is thanks dugudugu (industrial) erie shore consulting engineers, inc. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]