几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - 7-day flexural strength to determine 7-day tensile strength

7-day flexural strength to determine 7-day tensile strength
i using ufc 3-260-02 pavement design for airfields, 30 june 2001 to calculate the percentage of reinforcing steel required in the longitudinal direction.
one of the parameters is f(subt) = 7-day tensile strength of the concrete in psi determined using the splitting tensile test. this reference has a figure 5-1 to convert the 7-day flexural strenght into tensile strenght.
can you guys give me advice or point me to a reference in calculating the 7-day flexural strength for 3,000 psi, 4,000 and 5,000 psi so that i can find the 7-day tensile strength form this figuere.
thanks

find a job or post a job opening
beams are made of the paving mix and stored for three point loading results. the compressive strength has an assumed correlation to flexural strength, aci 318 9.5.2.3, fr = 7.5 x sq root (f'c).
is the modulus of rupture fr the same thing as flexure strength?
do you know how would i determine the 7-day flexural strength?
thanks

2009-09-07, 08:56 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	7-day flexural strength to determine 7-day tensile strength 7-day flexural strength to determine 7-day tensile strength i using ufc 3-260-02 pavement design for airfields, 30 june 2001 to calculate the percentage of reinforcing steel required in the longitudinal direction. one of the parameters is f(subt) = 7-day tensile strength of the concrete in psi determined using the splitting tensile test. this reference has a figure 5-1 to convert the 7-day flexural strenght into tensile strenght. can you guys give me advice or point me to a reference in calculating the 7-day flexural strength for 3,000 psi, 4,000 and 5,000 psi so that i can find the 7-day tensile strength form this figuere. thanks find a job or post a job opening beams are made of the paving mix and stored for three point loading results. the compressive strength has an assumed correlation to flexural strength, aci 318 9.5.2.3, fr = 7.5 x sq root (f'c). is the modulus of rupture fr the same thing as flexure strength? do you know how would i determine the 7-day flexural strength? thanks __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]