几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

aci318-63
does anyone out there know what was the air-entrainment requirements for cast-in-place concrete in aci318-63?
any information is greately appreciated.

amokhta,
aci318-63 did not give explicit air contents for given f'c or aggregate size or exposure but it referneced aci 613 "recommneded practice for selecting proportions for concrete".
fyi - the '63 code was about 100 half-size pages - '02 is close to 500 full-size pages (including commentary)!
hth
ps aci international still sells the older codes - but all in print form, not pdf.
ingenuity:
thank you for the response.
best regards

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-07, 10:05 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	aci318-63 aci318-63 does anyone out there know what was the air-entrainment requirements for cast-in-place concrete in aci318-63? any information is greately appreciated. amokhta, aci318-63 did not give explicit air contents for given f'c or aggregate size or exposure but it referneced aci 613 "recommneded practice for selecting proportions for concrete". fyi - the '63 code was about 100 half-size pages - '02 is close to 500 full-size pages (including commentary)! hth ps aci international still sells the older codes - but all in print form, not pdf. ingenuity: thank you for the response. best regards __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]