几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

allowable defects on beams
hi, some of the beams we adquired for the construction of a skid, came withs "details" so its there a rule or a specification, that describe the allowable defects on beams?. one of the beams came with a scratch of 0.6 mms deep, on the web section. the question its if we can use that beam or just we have to discard it.
thanks.
alex rodriguez
aisc has specs on tolerences. more importantly, a deep scratch in high tension zone will lead to a stress crack under load. i recommend grainding out and patching the deep scratch.
and then (if you can) orient the beam so that the repair is on the compression side of the bending stress field; or at least as far form the peak tension stress..

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-07, 10:54 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	allowable defects on beams allowable defects on beams hi, some of the beams we adquired for the construction of a skid, came withs "details" so its there a rule or a specification, that describe the allowable defects on beams?. one of the beams came with a scratch of 0.6 mms deep, on the web section. the question its if we can use that beam or just we have to discard it. thanks. alex rodriguez aisc has specs on tolerences. more importantly, a deep scratch in high tension zone will lead to a stress crack under load. i recommend grainding out and patching the deep scratch. and then (if you can) orient the beam so that the repair is on the compression side of the bending stress field; or at least as far form the peak tension stress.. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]