几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

building joints
i have a general question:
are there any guidelines or rules of thumb recommending building structural expansion joints in large 1-2 story steel framed buildings? i realize that for large buildings the fire wall location requirements would partially control.
i have checked aisc's design guide for low to mid-rise buildings. any other suggestions?
large means more than 200 feet in the smaller dimension. less than 350 feet may be designed without joints if unrestrained by connections to other structures.
the standard reference is "expansion joints in buildings", technical report no. 65, federal construction council, 1974. a graph that summarizes the recommendations is reproduced in the aisc steel manual, pci design handbook, and other texts.
here's a link for taro's reference...
thank you all. your information led me strait to what i needed.

2009-09-07, 05:39 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	building joints building joints i have a general question: are there any guidelines or rules of thumb recommending building structural expansion joints in large 1-2 story steel framed buildings? i realize that for large buildings the fire wall location requirements would partially control. i have checked aisc's design guide for low to mid-rise buildings. any other suggestions? large means more than 200 feet in the smaller dimension. less than 350 feet may be designed without joints if unrestrained by connections to other structures. the standard reference is "expansion joints in buildings", technical report no. 65, federal construction council, 1974. a graph that summarizes the recommendations is reproduced in the aisc steel manual, pci design handbook, and other texts. here's a link for taro's reference... thank you all. your information led me strait to what i needed. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]