几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

curved plate deflection under load
hi all,
my question relates to design of beam to support a curved plate 364mm long 42mm wide 3mm thich under o loading point 195mm from one end and a load area of 11mmx2mm the load is approx 10kilos> i want to calculate the deflection along the plate and design a beam to suit and hopefully standardise a method of calculating this for different arching heights with the plate. any info will be greatfully recieved
jwyn
i'm unclear what you are asking. is the curved plate to be supported at the ends? if so, where are the supports for the beam? such small loads and lengths would not require extensive design unless you plan on a lot of them.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-08, 04:12 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	curved plate deflection under load curved plate deflection under load hi all, my question relates to design of beam to support a curved plate 364mm long 42mm wide 3mm thich under o loading point 195mm from one end and a load area of 11mmx2mm the load is approx 10kilos> i want to calculate the deflection along the plate and design a beam to suit and hopefully standardise a method of calculating this for different arching heights with the plate. any info will be greatfully recieved jwyn i'm unclear what you are asking. is the curved plate to be supported at the ends? if so, where are the supports for the beam? such small loads and lengths would not require extensive design unless you plan on a lot of them. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]