几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

drilled pier shareware
i am doing some free design for our community. they are building a model of the wright brothers aircraft and the large scale model will be installed on a pipe mast. the mast is to be anchored with a drilled pier. although i designed these years ago, i don't have software now to do so. since this is a non-profit project, i need to find some freeware or spreadsheets to design the drilled pier.
thanks in advance for your help.
try the fhwa for a copy of the executable of com624. they should also have an input guide -
see section 1806.8.2.1 of the 1997 ubc for lateral loads and moments. for vertical loads use end bearing or side friction to resist loads.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-08, 07:45 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	drilled pier shareware drilled pier shareware i am doing some free design for our community. they are building a model of the wright brothers aircraft and the large scale model will be installed on a pipe mast. the mast is to be anchored with a drilled pier. although i designed these years ago, i don't have software now to do so. since this is a non-profit project, i need to find some freeware or spreadsheets to design the drilled pier. thanks in advance for your help. try the fhwa for a copy of the executable of com624. they should also have an input guide - see section 1806.8.2.1 of the 1997 ubc for lateral loads and moments. for vertical loads use end bearing or side friction to resist loads. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]