几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

european upn section channels
my office is currently trying to create standard symbols
for autocad and the upn sections and we need a little help:
can any one provide me with the internal flange angle(s)
for european upn section channels? - ive tried several sources which have all dims except the angle.
check out our whitepaper library.
look at the site below under beams->sections->channels
prex
the internal slope of the flanges of the upn is 8%, as shown in my catalogue.
fyi, the flanges of the ipn is 14%.
hope this helps.
many thanks jsj & prex.
jsj, would you contact me by e-mail(below) - i would like a copy of your catalogue.
thanks

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-08, 11:04 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	european upn section channels european upn section channels my office is currently trying to create standard symbols for autocad and the upn sections and we need a little help: can any one provide me with the internal flange angle(s) for european upn section channels? - ive tried several sources which have all dims except the angle. check out our whitepaper library. look at the site below under beams->sections->channels prex the internal slope of the flanges of the upn is 8%, as shown in my catalogue. fyi, the flanges of the ipn is 14%. hope this helps. many thanks jsj & prex. jsj, would you contact me by e-mail(below) - i would like a copy of your catalogue. thanks __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]