几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

expansion joint in underground structure
i have an underground parking garage thats about 182'x254'. the ramps that go from level to level are exposed to weather, and therefore so is the garage.
when i put in expansion joints, won't the soil pressure on the sides of the garage just squeeze the joints shut, thereby rendering them pretty much useless?
if i do not put in expansion joints, i think the structure will undergo unruly thermal stresses, and lead to cracking and spalling, therefore shortening the life of the structure. any thoughts?
if the structure is below ground, it does not need thermal expansion joints. it does need construction joints however to control cracking. dont forget the water stops for ground water control.
in undeground parking (just 1 or 2 level deep) normally not so open to weather our experience in temperate (-18ºc to 45 ºc or so air temperature range) spain indicates that with reasonably reinforced walls no having joints has worked well both in structural mats and walls, and is i would say our preferred trend under 60 m max dimension. over that we have preferably used some joints in both walls and mats. you then can have more thermal joints upwards for the buildings. and of course use waterstops or other dampproofing equivalent design for the joints in the project.

2009-09-09, 09:07 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	expansion joint in underground structure expansion joint in underground structure i have an underground parking garage thats about 182'x254'. the ramps that go from level to level are exposed to weather, and therefore so is the garage. when i put in expansion joints, won't the soil pressure on the sides of the garage just squeeze the joints shut, thereby rendering them pretty much useless? if i do not put in expansion joints, i think the structure will undergo unruly thermal stresses, and lead to cracking and spalling, therefore shortening the life of the structure. any thoughts? if the structure is below ground, it does not need thermal expansion joints. it does need construction joints however to control cracking. dont forget the water stops for ground water control. in undeground parking (just 1 or 2 level deep) normally not so open to weather our experience in temperate (-18ºc to 45 ºc or so air temperature range) spain indicates that with reasonably reinforced walls no having joints has worked well both in structural mats and walls, and is i would say our preferred trend under 60 m max dimension. over that we have preferably used some joints in both walls and mats. you then can have more thermal joints upwards for the buildings. and of course use waterstops or other dampproofing equivalent design for the joints in the project. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]