几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - fall protection system

fall protection system - anchor design load
does anyone know osha reference section numbers that spells out design load ( i believe it is 5000 pounds minimum load per lug) for fall protection system anchors?
thanks
jay
find a job or post a job opening
standards - 29 cfr - 1926.502(d)(15)
the complete section (yes, it is lengthy) can be found at the following link.
be careful with fall protection, there is more to it then just the load design, theres' fall geometry, types of lanyards, arresting loads on the unfortunate victim, retreival techniques etc. you should check out

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-09, 11:12 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	fall protection system - anchor design load fall protection system - anchor design load does anyone know osha reference section numbers that spells out design load ( i believe it is 5000 pounds minimum load per lug) for fall protection system anchors? thanks jay find a job or post a job opening standards - 29 cfr - 1926.502(d)(15) the complete section (yes, it is lengthy) can be found at the following link. be careful with fall protection, there is more to it then just the load design, theres' fall geometry, types of lanyards, arresting loads on the unfortunate victim, retreival techniques etc. you should check out __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]