查看单个帖子
旧 2009-09-09, 02:14 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 galvanic anodes - cos

galvanic anodes - cost?
does anyone have a rough (or accurate) idea of what galvanic anodes cost (small zinc hockey pucs placed in repaired concrete - wired to the rebar as sacrificial anodes?)


jae...the small disc type will run about $3.50 to $10.00 each, depending on size. i assume for repairs you will be looking at multiple discs, small diameter...so probably in the $3.50 to $5.00 each range.
if you are doing "cleanout" repairs where the concrete is excavated from around rebar, you'll have to provide a wire connection to the rebar, but that's not a big deal. if you are placing the rebar, you can get the discs with a center hole close to the size of your rebar, slide them over the rebar, then use a small torch to heat the zinc enough to bond to the steel.
i have not used the discs but have used magnesium anode packs buried in soil. the last time i bought one i believe it was about $30 or $40 for a 5 lb. pack, with attached lead.
check out...
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)