几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

loads on floor hatches
hi all,
i think i have asked this before. i am looking for a formula to calculate safe loading on aluminum plate floor hatches to arrive at the plate thickness and the bearing area required on each of the four sides. these hatches are subject to vehicular traffic of varying weights.
i do not have access to references such as rourke's
thanks in advance for any help.
check out our whitepaper library.
in the case of plates supported along fouir edges, the proportionate load carried by the short span is approximately:
p = b^4/(a^4 + b^4)
p = porportionate load carried by short span
a = length of short span
b = length of long span
when b/a > 1.5 design as one way
best

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-10, 11:23 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	loads on floor hatches loads on floor hatches hi all, i think i have asked this before. i am looking for a formula to calculate safe loading on aluminum plate floor hatches to arrive at the plate thickness and the bearing area required on each of the four sides. these hatches are subject to vehicular traffic of varying weights. i do not have access to references such as rourke's thanks in advance for any help. check out our whitepaper library. in the case of plates supported along fouir edges, the proportionate load carried by the short span is approximately: p = b^4/(a^4 + b^4) p = porportionate load carried by short span a = length of short span b = length of long span when b/a > 1.5 design as one way best __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]