几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

masonry reinf. @ openings
i'm trying to design reinforcing in a masonry wall both sides of opening...how can do that?
the same design of wall or a element under "axial-flexure" like a pilaster.
thanks
adcfl
i take the wind load from half the opening, and resist it with a 16" or 24" width of cmu adjacent to the opening. this jamb will almost always be heavily reinforced.
daveatkins
i did the design like a panel wall from window to window taken both half windows as a tributary areas and the panel of 40" wide, but the reviwer told me to design like a reinforced masonry element using "pa" and doing the equilibrium of forces in tension "c" and compression "c" and i don't really know how to do it. the only way that i've using equilibrium equation is for a shearwall. anybody can help me.
thanks
adcfl
(miami, fl)

2009-09-10, 12:45 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	masonry reinf. 2 openings masonry reinf. @ openings i'm trying to design reinforcing in a masonry wall both sides of opening...how can do that? the same design of wall or a element under "axial-flexure" like a pilaster. thanks adcfl i take the wind load from half the opening, and resist it with a 16" or 24" width of cmu adjacent to the opening. this jamb will almost always be heavily reinforced. daveatkins i did the design like a panel wall from window to window taken both half windows as a tributary areas and the panel of 40" wide, but the reviwer told me to design like a reinforced masonry element using "pa" and doing the equilibrium of forces in tension "c" and compression "c" and i don't really know how to do it. the only way that i've using equilibrium equation is for a shearwall. anybody can help me. thanks adcfl (miami, fl) __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]