几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

precast column on pilaster
i have a precast column that will be connected to a pilaster at the base, i have noticed on drawings for older projects that stirrups are closely spaced in the pilaster 2" from the top and spaced at 3" until about 2' from the top (around the anchor rods.) i am curious why such closely spaced stirrups immediately from the top, and how would you design these?
clansman
clansman - see aci 318-05, section 7.10.5.6.
does that answer your question?
perfect.
star for you.
clansman

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-15, 02:12 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	precast column on pilaster precast column on pilaster i have a precast column that will be connected to a pilaster at the base, i have noticed on drawings for older projects that stirrups are closely spaced in the pilaster 2" from the top and spaced at 3" until about 2' from the top (around the anchor rods.) i am curious why such closely spaced stirrups immediately from the top, and how would you design these? clansman clansman - see aci 318-05, section 7.10.5.6. does that answer your question? perfect. star for you. clansman __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]