几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

pressure release at reshores
hello all:
i am not at all familiar with shoring and reshoring used in concrete buildings and recently was asked this question by a concrete sub in a rfi which goes something like this...
"we will be using a shoring system that will allow us to strip the shoring around the shores that will still remain in place as part of the reshores. please advise if you want to provide a pressure relief at the location of shores that will be used as reshores before stripping"
is any one familiar with this scenario? i was told this is something very common in pt slabs. is that true?
thank you
in the response of your rfi indicate that you need more information to review the request.
you will find that this time the sub will give you adequate information to make a determination.

2009-09-15, 02:36 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	pressure release at reshores pressure release at reshores hello all: i am not at all familiar with shoring and reshoring used in concrete buildings and recently was asked this question by a concrete sub in a rfi which goes something like this... "we will be using a shoring system that will allow us to strip the shoring around the shores that will still remain in place as part of the reshores. please advise if you want to provide a pressure relief at the location of shores that will be used as reshores before stripping" is any one familiar with this scenario? i was told this is something very common in pt slabs. is that true? thank you in the response of your rfi indicate that you need more information to review the request. you will find that this time the sub will give you adequate information to make a determination. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]