几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

simplified wind load procedure
in asce7-98 when using the simplified wind load procedure, a consideration in the tables has been made for enclosed and partially enclosed buildings. in the 2000 ibc procedure for simplified wind loads, it does not appear that the difference between enclosed and partially enclosed buildings has has been considered. can someone explain why this is, or am i missing something? with the ibc 2000, can i use the the simplified method regardles of the building enclosure classification? why are they different?
find a job or post a job opening
in the first section of ibc, 1609.1.1, loads shall be determined in accordance with section 6 of asce 7. you should use the simplified method for enclosed structures only. if in doubt do the calcs per asce to verify.
ibc 2003 has revised the introduction to 1609.6.1 to read... like....that the simplified method shall be used for enclosed buildings with flat, gabled......
good luck

2009-09-15, 10:48 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	simplified wind load procedure simplified wind load procedure in asce7-98 when using the simplified wind load procedure, a consideration in the tables has been made for enclosed and partially enclosed buildings. in the 2000 ibc procedure for simplified wind loads, it does not appear that the difference between enclosed and partially enclosed buildings has has been considered. can someone explain why this is, or am i missing something? with the ibc 2000, can i use the the simplified method regardles of the building enclosure classification? why are they different? find a job or post a job opening in the first section of ibc, 1609.1.1, loads shall be determined in accordance with section 6 of asce 7. you should use the simplified method for enclosed structures only. if in doubt do the calcs per asce to verify. ibc 2003 has revised the introduction to 1609.6.1 to read... like....that the simplified method shall be used for enclosed buildings with flat, gabled...... good luck __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]