几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

snow and concrete loading
i have been searching for information regarding load factors for snow loading in combination with dead and live load. ibc calls for 1.2 d + 1.6 l + .5 s but then says any load comibinations that do not include seismic forces shall be governed by aci 9.2 (ibc 1605.2.1). however, aci does not make reference to any snow loading, at least i did not find any reference. can anyone give some advice?
check out our whitepaper library.
with the older 1.4d + 1.7l aci combinations, we would always place snow with the "l" loads.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-15, 11:53 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	snow and concrete loading snow and concrete loading i have been searching for information regarding load factors for snow loading in combination with dead and live load. ibc calls for 1.2 d + 1.6 l + .5 s but then says any load comibinations that do not include seismic forces shall be governed by aci 9.2 (ibc 1605.2.1). however, aci does not make reference to any snow loading, at least i did not find any reference. can anyone give some advice? check out our whitepaper library. with the older 1.4d + 1.7l aci combinations, we would always place snow with the "l" loads. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]